Atkins and Pearce Ben-Har® 1151-FR Class H Grade C Silicone Rubber Coated Sleeving
MFR #:Ben-Har® 1151-FR-C
EIS #:PH21-Ben-Har 1151-FR-C
Series #:Ben-Har® 1151-FR-C
MFR #:Ben-Har® 1151-FR-C
EIS #:PH21-Ben-Har 1151-FR-C
Series #:Ben-Har® 1151-FR-C
Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. - The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals.
$19.68
- $25,722.60
Select from the options below
Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. - The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals.
Product Options
Showing 8 out of 23 options
 | Gauge: 24 AWG | Length: 500 ft | EIS Part #: SRFRC24WHB | $ / Foot | |
| Gauge: 22 AWG | Length: 500 ft | EIS Part #: SRFRC22WHB | $ / Foot | |
| Gauge: 20 AWG | Length: 500 ft | EIS Part #: SRFRC20WHB | $ / Foot | |
| Gauge: 2 Inch | Length: 50 ft | EIS Part #: SRFRC2.0WAB | $ / Foot | |
| Gauge: 12 AWG | Length: 250 ft | EIS Part #: SRFRC12WFB | $ / Foot | |
| Gauge: 10 AWG | Length: 250 ft | EIS Part #: SRFRC10WFB | $ / Foot | |
| Gauge: 1.5 Inch | Length: 50 ft | EIS Part #: SRFRC1.50WAB | $ / Foot | |
| Gauge: 1.25 Inch | Length: 50 ft | EIS Part #: SRFRC1.25AB | $ / Foot |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameSilicone Rubber Coated Sleeving
Trade NameBen-Har®
SeriesBen-Har® 1151-FR-C
Design & Construction
ColorWhite
GradeC
Insulation Coating TypeSilicone
Insulation MaterialSilicone Rubber
Insulation TypeClass H
NEMA SpecificationNEMA TF-1 Type 5
Braid TypeFiberglass
Performance Details
Tear Strength70 psi
Tensile Strength875 psi
Electrical Properties
Dielectric Strength485 V/mil
Breakdown Voltage2500 V
Physical Properties
Elongation500%
Hardness35 +/- 5 Shore A
Features
- Excellent low temperature flexibility with outstanding flame retardant properties
- Compatible with common class H insulating varnishes
- Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons, slight swelling may be produced by aromatic solvents and chlorinated hydrocarbons
- Ketones and esters may cause deterioration
- Dielectric Grade: C
- Volume Resistivity: 2.48 Ohm-cm x 10^14 Ohm-cm
Applications
- Appliance Assemblies
- Wire Harnesses
- Transformer Leads
- Power Supplies
- Motor Coil and Heater Leads