Von Roll/John C Dolph Dolphon® XL-2102 Solventless Polyester Dip And VPI Resin
MFR #:Dolphon® XL-2102
EIS #:PH21-Dolphon XL-2102
MFR #:Dolphon® XL-2102
EIS #:PH21-Dolphon XL-2102
Von Roll/John C Dolph Dolphon® XL-2102 Solventless Polyester Dip And VPI Resin, 3250 V/Mil (Dry), 2890 V/Mil (Wet) Dielectric Strength, >200 °F Flash Point, 8 - 13 min At 257 °F (125 °C), ASTM D 3056 Gel Time, 350 - 650 cps At 77 °F (25 °C), ASTM D2196 Viscosity. - XL-2102 is one of a new class of high flash point, very low VOC, solventless polyester resins. It is especially recommended for dip and bake or VPI applications. Exceptionally stable, XL-2102 contains no conventional monomers or formaldehyde releasing compounds.
$260.65
- $326.44
Select from the options below
Von Roll/John C Dolph Dolphon® XL-2102 Solventless Polyester Dip And VPI Resin, 3250 V/Mil (Dry), 2890 V/Mil (Wet) Dielectric Strength, >200 °F Flash Point, 8 - 13 min At 257 °F (125 °C), ASTM D 3056 Gel Time, 350 - 650 cps At 77 °F (25 °C), ASTM D2196 Viscosity. - XL-2102 is one of a new class of high flash point, very low VOC, solventless polyester resins. It is especially recommended for dip and bake or VPI applications. Exceptionally stable, XL-2102 contains no conventional monomers or formaldehyde releasing compounds.
Product Options
Showing 2 out of 2 options
 | Container Size: 5 gal | EIS Part #: DOLXL21025G | $ / US gallon | |
| Container Size: 55 gal | EIS Part #: DOLXL210255G | $ / US gallon |
- Attributes
- Features
- Applications
Attributes
General Information
Item NamePolyester Dip and VPI Resin
Trade NameDolphon®
SeriesDolphon® XL-2102
General Features
Net Weight8.8 - 9.2 lb/gal
Shelf Life12 Months
TypeSolventless
Design & Construction
ColorClear/Amber
Performance Details
Gel Time8 min
Technical Details
Flash Point200 °F
Chemical Properties
Viscosity350 cP
Electrical Properties
Dielectric Strength3250 V/mil
Features
- Contains no formaldehyde, styrene, vinyl toluene, t-butyl styrene, or diallyl phthalate (DAP)
- Very low weight loss on cure
- Extremely low odor
- Excellent wetting properties
- Low viscosity
- Easy processing, fast cure cycle
- Superior tank stability
- Excellent, tough film and good bond strength
- >200 °F high flash point
- 0.5 - 0.7 Mils/side (ASTM D 115) film build
- 0.20 lbs/gal ASTM, D 6053 VOC content
- 29 lbs at 25 °C, 9 lbs at 150 °C helical coil bond strength (ASTM D 2519)
- 19 lbs at 180 °C (ASTM D 4882) twisted coil bond strength
- 1.2 x 10^14 Ohms (ASTM D 257) surface resistivity
- 1.4 x 10^14 Ohm-cm (ASTM D 257) volume resistivity
- Dielectric Strength: 3250 V/Mil (Dry), 2890 V/Mil (Wet)
- Flash Point: >200 °F
- Viscosity: 350 - 650 cps at 77 °F/25 °C, ASTM D2196
- Gel Time: 8 - 13 min
- Viscosity: 350 - 650 cP
Applications
- Rotors
- Random Wound Coils
- D.C. Traction Coils
- Stators
- Armatures
- Form Wound Coils
- Inductors
- Field Coils
- Transformers