EIS #:3M1020X18X25YD
UPC #:00021200647826
EIS #:3M1020X18X25YD
UPC #:00021200647826
Out of Stock
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape 1020 is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print. - This 0.02 Inch (0.51 mm) white, double coated foam tape with differential adhesion used to mount flexographic print plates. White, flexo plate mounting tape with differential adhesion.
Requires Quote
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape 1020 is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print. - This 0.02 Inch (0.51 mm) white, double coated foam tape with differential adhesion used to mount flexographic print plates. White, flexo plate mounting tape with differential adhesion.
- Attributes
- Features
- Applications
Attributes
General Information
Item NamePlate Mounting Tape
Trade NameCushion-Mount™ Plus
Series1020
General Features
Storage Temperature60 to 80 °F
Design & Construction
Adhesive TypeDifferential Acrylate
ColorWhite
Carrier MaterialPolyethylene Foam
Liner MaterialPolycoated Kraft Paper
Physical Properties
Core Size3 Inch
Length25 Yard
Thickness2 mil
Width18 Inch
Liner Thickness0.0045 Inch
Environmental Condition
Temperature Rating120 °F
Features
- Provides high quality standard combination print. The adhesives remove cleanly from the print plate and the print cylinder
- Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality
- The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press and clean plate removal when demounting
- The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting
- No air release and no consumer label
- Composite sleeves and urethane sleeves
- Standard plate side adhesion
Applications
- For Flexographic Plate Mounting, Print Industries