EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign up

home
0
{0} items in cart
July Shop & Earn
0
0

Cytec Industries EN-12 Conathane® Conap® Part B Molding and Encapsulating System, 1 gal, Translucent Amber

The image shown is representative of the product family and may not specifically be the individual item.  Conathane TU-6090 is a liquid two-component polyurethane casting system formulated to produce 90 Shore A elastomers. TU-6090 does not contain MbOC…

MFR #:EN12BG

EIS #:CONEN12BG

Series #:EN-12

MFR #:EN12BG

EIS #:CONEN12BG

Series #:EN-12

Out of Stock

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
0
0
Conathane EN-11 and EN-12 are two-component, highly flexible liquid polyurethane molding and encapsulating systems that ensure the performance of electrical/electronic assemblies exposed to severe environmental extremes. Elastomers prepared from these systems exhibit the outstanding properties. These systems have also shown exceptional adhesion to a wide variety of substrates. - The systems are recommended for cable and connector potting and molding - both military and commercial, electronic module potting, wire wound device encapsulation and strain sensitive component potting. Their excellent moisture resistance also suggests their use as 100% solids thick-film coatings for printed circuitry or, because of their solubility in most commercially available solvents, as flexible thin-film coatings.
$522.19 / US gallon

Buy In Bulk & Save

1-2$522.19 / 1 US gallon
3-4$477.93 / 1 US gallon
5-9$433.82 / 1 US gallon
10+$408.67 / 1 US gallon

Buy In Bulk & Save

1-2$522.19 / 1 US gallon
3-4$477.93 / 1 US gallon
5-9$433.82 / 1 US gallon
10+$408.67 / 1 US gallon

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
0
0
Conathane EN-11 and EN-12 are two-component, highly flexible liquid polyurethane molding and encapsulating systems that ensure the performance of electrical/electronic assemblies exposed to severe environmental extremes. Elastomers prepared from these systems exhibit the outstanding properties. These systems have also shown exceptional adhesion to a wide variety of substrates. - The systems are recommended for cable and connector potting and molding - both military and commercial, electronic module potting, wire wound device encapsulation and strain sensitive component potting. Their excellent moisture resistance also suggests their use as 100% solids thick-film coatings for printed circuitry or, because of their solubility in most commercially available solvents, as flexible thin-film coatings.

Attributes

General Information
Item NameMolding and Encapsulating System
Trade NameConathane®, Conap®
SeriesEN-12
General Features
Shelf Life15 Months
Storage Temperature70 to 85 °F
TypePart B
Design & Construction
Color - Part-BTranslucent Amber
Cure TypeRoom Temperature
Form - Part-BLiquid
Performance Details
Full Cure TimeSee TDS
Tensile Strength400 psi
Chemical Properties
Composition - Part-BPolyurethane
Specific Gravity - Part-B0.99
Viscosity - Part-B6000 cP
Electrical Properties
Dielectric Strength600V/Mil
Physical Properties
Container Size1 gal
Elongation350%
Hardness50 Shore A
Environmental Condition
Temperature Rating-65 to 130 °C