MFR #:2129.80
EIS #:AEMC6240
MFR #:2129.80
EIS #:AEMC6240
Out of Stock
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The 10A microhmmeter model 6240 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four lead Kelvin method of testing, the model 6240 microhmmeter accurately measures very low resistance within 0.25%. Resistance measurements are automatically calculated from 1 microhm - 400 ohm with resolutions down to 1 microhm. The model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function. - The model 6240 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC. The DataView software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports.
$5,673.64 / Piece
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The 10A microhmmeter model 6240 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four lead Kelvin method of testing, the model 6240 microhmmeter accurately measures very low resistance within 0.25%. Resistance measurements are automatically calculated from 1 microhm - 400 ohm with resolutions down to 1 microhm. The model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function. - The model 6240 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC. The DataView software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameMicro-Ohmmeter
General Features
Net Weight10 lb
Design & Construction
Battery TypeRechargeable NiMH
ColorYellow Case, Gray Faceplate
DisplayLCD
Performance Details
ResolutionSee Specsheet
Technical Details
Accuracy0.25% of RDG +/-2 Counts
Electrical Properties
ResistanceSee TDS
Test Current10A, 1A, 100mA, 10mA
Physical Properties
Depth7.17 Inch
Dial Size4 Inch x 2.25 Inch
Length10.7 Inch
Width9.76 Inch
Environmental Condition
Degree of ProtectionIP53/IP54
Temperature Rating-10 to 55 °C
Supporting Information
IncludesExtra Large Tool Bag, (2) 10 ft Kelvin Clips, US 115V Power Cord, (2) 12.5A Fuse, Pad, Battery, USB Stick, Manual, Dataview® Software
Safety RatingCAT II 300V, CAT III 50V
Features
- Manual temperature compensation (with DataView software)
- Front panel polarity reverse function
- Stores up to 99 test results
- Operator safety by automatic discharge of residual charge on the equipment under test
- Auto store of multiple test results
- Internal, rechargeable batteries conduct up to 850, 10A tests
- Built-in battery pack recharger recharges the batteries by connecting to the AC line using a standard line cord
- 4-Wire measurement with automatic compensation of undesirable voltages and lead resistance
- Large multi function backlight display
- Direct display of the measurement with its units, range and test current
- Rugged, sealed case
- 4900 count digital LCD display
Applications
- For Ground Connections and Continuity Measurement, Bonding Resistance Measurements on Motors and Small Transformers, Contact Resistance Measurements on Breakers and Switches, Component Measurement, Electrical Cable Resistance Measurement, Mechanical Bond Tests, Wire to Terminal Connections, Aircraft and Rail Bonds