3M EPS-300 3:1 Adhesive-Lined Heat Shrink Tubing, 1", 4', MFR ID 7000133618
- MFR #7000133618
- EIS #EPS3001.0
- UPC #00051128599228
$560.38 / 100Foot
In Stock | Ready to Ship
Min QTY1QTY Increment1more info
3M™ Heat Shrink Tubing EPS 300 is color coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is irradiation cross linked for abrasion resistance and helps to maintain the high flow as well as good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
Features
- When heated in excess of 121 °C (250 °F), EPS-300 tubing rapidly shrinks to a skintight fit, forcing the melted adhesive to flow and cover the substrate
- The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals
- Upon cooling, the adhesive solidifies forming a durable, non-drying, flexible and water resistant barrier
- When freely recovered, the tubing will shrink to 33% of its original diameter
- The recovered wall thickness of the tubing is proportional to the degree of recovery
- Non-corrosive chemical effect
- Non-nutrient fungus resistance
- Excellent fluid resistance
- Self-extinguishing
- No dripping, flowing or cracking (4 hr at 225 °C) of heat shock
- Volume Resistivity: 10^14 Ohm-cm
- Reflow Temperature: >80 °C
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 110 °C
- Wall Thickness: 0.1 Inch (Total Recovered), 0.04 Inch (Meltable Recovered)
Applications
- Offers Excellent Environmental Protection for Electronic Components, Wire Splices, Wire Bundles and Harness Breakouts, Automotive, Truck and Marine Wire Splices and Harness Breakouts are also Quickly and Easily Protected from a Variety of Harsh Environments
- Automotive, Truck and Marine Wiring Splices and Harness Breakouts are Quickly and Easily Protected from Harsh Environments
General Information
| Item Name | Heat Shrink Tubing |
| Trade Name | 3M |
General Features
| Shelf Life | 120 Months |
Design & Construction
| Color | Black |
| Insulation Material | Flexible Polyolefin |
| Minimum Shrink Temperature | 121 °C |
| Wall Type | Dual-Thin |
Performance Details
| Flame Retardant | Yes |
| Heat Aging | 168 hr |
| Heat Shock | 4 hr |
| Low Temperature Flexibility | -55 °C |
| Shrink Ratio | 3:1 |
| Tensile Strength | 2100 psi |
Chemical Properties
| Specific Gravity | 1.3 |
Electrical Properties
| Dielectric Strength | 700 V/mil |
| Voltage Rating | 600 V |
Physical Properties
| Elongation | 450% |
| Expandable Diameter | 1 Inch |
| Length | 4 ft |
| Recovered Diameter | 0.32 Inch |
| Wall Thickness | 0.1 Inch |
| Water Absorption | 0.3% |
Environmental Condition
| Reflow Temperature | 80 °C |
| Temperature Rating | -55 to 110 °C |
Documents
No Documents Found