EIS #:PDGC595G
EIS #:PDGC595G
Out of Stock
Min Qty:1
|Qty Increment:1
Application Methods: Mix Resin and Hardener in recommended ratio until homogeneous. Apply with spatula, trowel or stiff brush. Products are filled and sold by weight and may contain less than the nominal volume of the container. - ELAN-Tron® C 59 Hardener is part of a filled, 100% solids, two-component epoxy resin systems
Requires Quote / US pound
Min Qty:1
|Qty Increment:1
Application Methods: Mix Resin and Hardener in recommended ratio until homogeneous. Apply with spatula, trowel or stiff brush. Products are filled and sold by weight and may contain less than the nominal volume of the container. - ELAN-Tron® C 59 Hardener is part of a filled, 100% solids, two-component epoxy resin systems
- Attributes
- Features
- Documents
Attributes
General Information
Item NameHardener
Trade NameElan-Tron®
SeriesElan-Tron® C 59
General Features
Net Weight8.1 - 8.3 lb/gal
Shelf Life12 Months
Design & Construction
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time80 °C/176 °F For 10 - 20 min
Gel Time15 min
Chemical Properties
Mixing Ratio100 (Parts By Weight and Volume) Resin, 11 (Parts By Weight) 18 (Parts By Volume) Hardener
Viscosity - Part-B10 cP
Physical Properties
Container Size41 lb
Container TypePail
Hardness83 Shore D
Features
- Non-flowing paste
- Room temperature cure
- Mix resin and hardener in recommended ratio until homogeneous, apply with spatula, trowel or stiff brush application methods
- <1% (ASTM D2566) linear shrinkage
- 0.1% (ASTM D570 24 hours at 25 °C / 77 °F) water absorption
- 105 °C glass transition temperature
- 55 ppm / °C (below Tg), 160 ppm / °C (above Tg) coefficient of thermal expansion
- Volume Resistivity: 6.2 x 10^14 Ohm-cm at 25 °C / 77 °F
- 2.6 at 1 kHz - 25 °C / 77 °F, 2.7 at 1 kHz - 100 °C / 212 °F, 3.4 at 1 kHz - 150 °C / 302 °F dielectric constant
- 0.01 at 1 kHz - 25 °C / 77 °F, 0.01 at 1 kHz - 100 °C / 212 °F, 0.25 at 1 kHz - 150 °C / 302 °F dissipation factor
- Gel Time: 5 - 10 min at 25 °C/77 °F
- Container Size: 41 lb/5 gal
- Flash Point: >94 °C Resin, 99 °C Hardener (ASTM D93)
- Density: 0.9825 g/cm3 (25 °C (77 °F)) (1.013 hPa)
- Viscosity - Part-B: 10 - 20 CP at 25 °C/77 °F
- Gel Time: 15 - 30 min
- Viscosity - Part-B: 10 - 20 cP