EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign up

home
0
{0} items in cart
September Shop & Earn
0
0

Elantas PDG Elan-Cast® C-295 Two-Component Epoxy Hardener, 40 lb/5 gal

The image shown is representative of the product family and may not specifically be the individual item.
The image shown is representative of the product family and may not specifically be the individual item.
The image shown is representative of the product family and may not specifically be the individual item.

MFR #:C29540LB

EIS #:C29540LB

MFR #:C29540LB

EIS #:C29540LB

Out of Stock

Min Qty:1

  |  

Qty Increment:1

This material ships LTL (Less than Truck Load)
0
0
Elantas PDG Elan-Cast® C 295 Two-Component Epoxy Hardener, Epoxy Base Type, 1.2640 g/cm3 (77 °F (25 °C)) Density, 530 V/Mil At 25 °C/77 °C (60 Mil), 490 V/Mil At 25 °C/77 °C (60 Mil) After 24 hr in Water Dielectric Strength, > 80% At 25 °C/77 °F Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 80 °C/176 °F + 4 hr At 120 °C/248 °F + 4 hr At 150 °C/302 °F Full Cure Time, 150 - 180 min At 125 °C/77 °F Gel Time, 65 - 70 Shore D At 25 °C/77 °F (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 100 (Parts By Weight) 101 (Parts By Volume) Hardener Mixing Ratio, 400 psi At 25 °C/77 °F Tensile Strength, 0.2 - 0.3 W/mK (ASTM C518) Thermal Conductivity, 50000 - 70000 CP At 25 °C/77 °F (ASTM D2196), 2000 - 4000 CP At 55 °C/194 °F (ASTM D2196) Viscosity, 3000 - 11000 CP At 25 °C/77 °F Viscosity - Part-A. - ELAN-Cast® E 295 black/C 295 epoxy is a two-component, heat-cured, 100%-solids resin system, bench casting / potting, vacuum casting / potting application methods.
$57.38 / US pound

Min Qty:1

  |  

Qty Increment:1

This material ships LTL (Less than Truck Load)
0
0
Elantas PDG Elan-Cast® C 295 Two-Component Epoxy Hardener, Epoxy Base Type, 1.2640 g/cm3 (77 °F (25 °C)) Density, 530 V/Mil At 25 °C/77 °C (60 Mil), 490 V/Mil At 25 °C/77 °C (60 Mil) After 24 hr in Water Dielectric Strength, > 80% At 25 °C/77 °F Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 80 °C/176 °F + 4 hr At 120 °C/248 °F + 4 hr At 150 °C/302 °F Full Cure Time, 150 - 180 min At 125 °C/77 °F Gel Time, 65 - 70 Shore D At 25 °C/77 °F (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 100 (Parts By Weight) 101 (Parts By Volume) Hardener Mixing Ratio, 400 psi At 25 °C/77 °F Tensile Strength, 0.2 - 0.3 W/mK (ASTM C518) Thermal Conductivity, 50000 - 70000 CP At 25 °C/77 °F (ASTM D2196), 2000 - 4000 CP At 55 °C/194 °F (ASTM D2196) Viscosity, 3000 - 11000 CP At 25 °C/77 °F Viscosity - Part-A. - ELAN-Cast® E 295 black/C 295 epoxy is a two-component, heat-cured, 100%-solids resin system, bench casting / potting, vacuum casting / potting application methods.

Attributes

General Information
Item NameEpoxy Hardener
Trade NameElan-Cast®
SeriesElan-Cast® C-295
General Features
Net Weight10.4 - 10.8 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Full Cure Time4 hr at 80 °C/176 °F + 4 hr at 120 °C/248 °F + 4 hr at 150 °C/302 °F
Gel Time150 min
Tensile Strength400 psi
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight and Volume) Resin, 100 (Parts By Weight) 101 (Parts By Volume) Hardener
Viscosity50000 cP
Viscosity - Part-A3000 cP
Electrical Properties
Dielectric Strength530 V/mil
Physical Properties
Container Size40 lb
Elongation> 80% at 25 °C/77 °F
Hardness65 - 70 Shore D at 25 °C/77 °F (ASTM D2240)