MFR #:500329
EIS #:LOCPC20MG
Series #:LOC-PC20M
MFR #:500329
EIS #:LOCPC20MG
Series #:LOC-PC20M
In Stock
Min Qty:1
|Qty Increment:1
Pack:4/Carton
Hazardous Materials require special handling.
Hysol PC20M is a stable, clear material, suitable for continuous operation from -65 to 125 °C. This material may be applied by brush, spray or dip to electrical parts for improved moisture and environmental protection. LOCTITE® STYCAST PC 20M is a stable clear material suitable for continuous operation up to 110°C. It may be applied by brush, dip, or spray to electrical parts for improved moisture and environmental protection. Components and joints may be repaired, by heating the coating with a soldering iron, for easy removal, or the entire coating may be removed with a suitable solvent. When fully cured, LOCTITE STYCAST PC 20M exhibits superior toughness, and abrasion and solvent resistance. Even after long exposure to the elements, the coating retains its very light color.
$300.67 / US gallon
Pack: 4/Carton
Min Qty:1
|Qty Increment:1
Pack:4/Carton
Hazardous Materials require special handling.
Hysol PC20M is a stable, clear material, suitable for continuous operation from -65 to 125 °C. This material may be applied by brush, spray or dip to electrical parts for improved moisture and environmental protection. LOCTITE® STYCAST PC 20M is a stable clear material suitable for continuous operation up to 110°C. It may be applied by brush, dip, or spray to electrical parts for improved moisture and environmental protection. Components and joints may be repaired, by heating the coating with a soldering iron, for easy removal, or the entire coating may be removed with a suitable solvent. When fully cured, LOCTITE STYCAST PC 20M exhibits superior toughness, and abrasion and solvent resistance. Even after long exposure to the elements, the coating retains its very light color.
- Attributes
- Features
Attributes
General Information
Item NameConformal Coating
Trade NameStycast
SeriesLOC-PC20M
General Features
Shelf Life18 Months
Storage Temperature23 °C or Below
Design & Construction
ColorAmber
Cure TypeRoom Temperature/Heat Cure
FormLiquid
Performance Details
Application Time30 - 45 min
Evaporation Rate<0.1
Full Cure Time24 hr at 77 °F
Chemical Properties
Specific Gravity0.94
Viscosity1500 - 2500 cP
VOC526g/L
Electrical Properties
Dielectric Strength2000V/Mil
Physical Properties
Container Size1 gal
Container TypePail
Odor/ScentAromatic
Environmental Condition
Temperature Rating110 °C
Features
- Flexibility no cracking over 1/8 Inch diameter mandrel
- Film thickness adjustable from 0.001 - 0.004 Inch
- Fungus resistance non-nutrient per ASTM G21
- Fluorescent when viewed under ultraviolet light (black light)
- No blistering, wrinkling, cracking or peeling of film, no discoloration of printed conductors or substrate after thermal shock or after moisture resistance testing