text.skipToContent text.skipToNavigation

Elantas PDG Pedigree® 50 VTC Precatalyzed Polyester Impregnating Resin, 485 lb/5 gal

ID: 50VTC485LB Mfr ID: 50VTC485LB
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Pedigree® 50 VTC Precatalyzed Polyester Impregnating Resin, 1.0950 g/cm3 (77 deg F (25 deg C)) Density, 4000 V/Mil At 1.5 Mil - 25 deg C/77 deg F, 2800 V/Mil At 1.5 Mil - 25 deg C/77 deg F (After 24 hr in Water) Dielectric Strength, 53 deg C (ASTM D93) Flash Point, 1 hr At 163 deg C/325 deg F or 3 hr At 149 deg C/300 deg F Full Cure Time, 10 - 15 min At 125 deg C/257 deg F (Sunshine) Gel Time, 60 - 65 Shore D (ASTM D2240) Hardness, 150 - 250 CP At 25 deg C/77 deg F Viscosity.

USD $6.61 / LB

Buy more and save

485-6304 $6.61 / LB
6305-12124 $5.57 / LB
12125+ $4.81 / LB

Check availability 

This item may be sold in units of 485.

  • Brand name :  Elantas PDG
  • Trade Name :  Pedigree®
  • Series :  Pedigree® 50 VTC
  • Item Name :  Precatalyzed Polyester Impregnating Resin
  • Short Desc :  RESIN,50 VTC,LOW ODOR 485LB/55GL DR
  • UNSPSC :  13111003

Pedigree® 50 VTC is a precatalyzed, 100%- reactive unsaturated polyester resin in vinyl toluene monomer.

Performance Details
Full Cure Time 1 hr at 163 deg C/325 deg F or 3 hr at 149 deg C/300 deg F 
Gel Time 10  min
Design & Construction
Form Liquid 
General Features
Shelf Life 6 Months 
Net Weight 9.0 - 9.3 lb/gal 
Environmental Condition
Flash Point 53  deg C
Electrical Properties
Dielectric Strength 4000  V/Mil
Chemical Properties
Viscosity 150  cP
Physical Properties
Hardness 60 - 65 Shore D (ASTM D2240) 
Container Size 485  lb
Container Type Drum 

Elantas PDG Pedigree® 50 VTC Precatalyzed Polyester Impregnating Resin, 485 lb/5 gal Brochure 

Elantas PDG Pedigree® 50 VTC Precatalyzed Polyester Impregnating Resin, 485 lb/5 gal Safety Data Sheet (SDS) 

Features :

  • Excellent electrical properties
  • Compatible with a wide variety of magnet wire constructions
  • Semi-flexible for noise suppression
  • Low viscosity for excellent penetration
  • Can be modified with mineral fillers to improve heat dissipation
  • UL recognized insulation systems up to class 240
  • Conforms to MIL-I-24092-B
  • Dip-and-bake, vacuum impregnation, vacuum-pressure impregnation application methods
  • 2.9 pounds/gallon (ASTM D6053-96) volatile organic content
  • 16 Pounds at 25 deg C / 77 deg F, 1 Pounds at 150 deg C / 302 deg F helical coil bond strength over MW 35
  • Secondary insulation
  • Container Size: 485 lb/5 gal
  • Dielectric Strength: 4000 V/Mil at 1.5 Mil - 25 deg C/77 deg F, 2800 V/Mil at 1.5 Mil - 25 deg C/77 deg F (After 24 hr in Water)
  • Flash Point: 53 deg C (ASTM D93)
  • Viscosity: 150 - 250 CP at 25 deg C/77 deg F
  • Density: 1.0950 g/cm3 (77 deg F (25 deg C))
  • Gel Time: 10 - 15 min
  • Viscosity: 150 - 250 cP

Applications :

  • For Impregnation of Small and Large Transformer Windings