MFR #:TU-8040
EIS #:PH11-TU-8040
Series #:TU-8040
MFR #:TU-8040
EIS #:PH11-TU-8040
Series #:TU-8040
Conathane TU-8040 is a two-component polyurethane designed to produce a 40 shore A material that is tough and has high elongation and tear strength. This system has a low mixed viscosity and adequate pot life for large volume casting. - Cytec Conathane polyurethane sealant has low moisture sensitivity and easy to cast intricate molds.
$697.57
- $3,028.63
Select from the options below
Conathane TU-8040 is a two-component polyurethane designed to produce a 40 shore A material that is tough and has high elongation and tear strength. This system has a low mixed viscosity and adequate pot life for large volume casting. - Cytec Conathane polyurethane sealant has low moisture sensitivity and easy to cast intricate molds.
Product Options
Showing 1 out of 1 options
Container Size: 5 gal | EIS Part #: CONTU80405G | $ / Piece |
- Attributes
- Features
- Applications
Attributes
General Information
Item NamePolyurethane Sealant
Trade NameConathane®
SeriesTU-8040
Design & Construction
ColorPart 1: Clear to Light Amber, Part 2: Light Amber
Cure TypeRoom Temperature
FormLiquid
Chemical Properties
CompositionResin Part A, Hardener Part B
Specific Gravity1.07
Viscosity4000 cP at 25 °C Part A, 450 cP at 25 °C Part B
Physical Properties
Container TypeKit
Hardness40 Shore A
Features
- 1:1 mix ratio
- Low mixed viscosity
- Self de-airing
- Low moisture sensitivity
- Ease of use
- Easy-to-cast intricate molds
- No need to pull vacuum
- Humidity not a factor
- Specific gravity of 1.07 (Part A), 1.07 (Part B)
Applications
- For Plaster and Cement Molds, Vibration Damping Pads, Detailed Molds with Undercuts