text.skipToContent text.skipToNavigation

Elantas PDG Sterling® E400 Two-Component Polyester Resin, 550 - 630 lb

ID: PED400PRECDRUM Mfr ID: PED400PRECDRUM
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Sterling® P400 Two-Component Polyester Resin, Room Temperature Cure Type, 1.6170 g/cm3 (77 deg F (25 deg C)) Density, 300 V/Mil At 25 deg C/77 deg F - 125 Mil (ASTM D149) Dielectric Strength, >94 deg C (ASTM D93) Flash Point, 4 - 8 hr At 25 deg C/77 deg F Full Cure Time, 15 - 25 min At 25 deg C/77 deg F (250 g) Gel Time, 82 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 deg C/77 deg F Viscosity, 400 - 800 CP At 25 deg C/77 deg F Viscosity - Part-B.

USD $8.80 / LB

Buy more and save

630-7149 $8.80 / LB
7150-13749 $7.40 / LB
13750+ $6.38 / LB

Check availability 

This item may be sold in units of 630.

  • Brand name :  Elantas PDG
  • Trade Name :  Sterling®
  • Series :  Sterling® P400
  • Item Name :  Polyester Resin
  • Short Desc :  RESIN,POLYESTER,P 400 VTC35-F 550-630LB
  • UNSPSC :  13111003

Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.

Performance Details
Full Cure Time 4 - 8 hr at 25 deg C/77 deg F 
Gel Time 15  min
Design & Construction
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 13.3 - 13.7 lb/gal Resin, 8.5 - 8.7 lb/gal Hardener 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 300  V/Mil
Chemical Properties
Viscosity 50000  cP
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener 
Viscosity - Part-B 400  cP
Physical Properties
Hardness 82 Shore D 
Container Size 550  lb

Elantas PDG Sterling® E400 Two-Component Polyester Resin, 550 - 630 lb Safety Data Sheet (SDS) 

Elantas PDG Sterling® E400 Two-Component Polyester Resin, 550 - 630 lb Brochure 

Features :

  • High bond strength
  • Chemical and moisture resistant
  • Fast cure in thin films
  • Highly filled for improved heat dissipation
  • Thixotropic for application on vertical surfaces
  • Suitable for class 180 service
  • Brush on, knife/spatula application methods
  • Secondary insulation
  • Gel Time: 10 - 20 min at 118 deg C/244 deg F (Sunshine)
  • Dielectric Strength: 300 V/Mil at 25 deg C/77 deg F - 125 Mil (ASTM D149)
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 50000 - 100000 CP at 25 deg C/77 deg F
  • Density: 1.6170 g/cm3 (77 deg F (25 deg C))
  • Viscosity - Part-B: 400 - 800 CP at 25 deg C/77 deg F
  • Container Size: 550 - 630 lb
  • Gel Time: 15 - 25 min
  • Viscosity: 50000 - 100000 cP
  • Viscosity - Part-B: 400 - 800 cP

Applications :

  • For Protective Overcoat for Motor Windings, Bus Bars, Switch Gear, Etc., General-Purpose Adhesive