text.skipToContent text.skipToNavigation

3M 1020 Cushion-Mount™ Plus Polyethylene Foam Plate Mounting Tape, 18" x 25 yd x 2 Mil, White

ID: 3M1020X18X25YD Mfr ID: 70006219706
Manufactured by: 3M Industrial Adhesives and Tapes
3M Cushion-Mount Plus plate mounting tapes are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination and solid printing.

USD $1,111.30 / RL

Buy more and save

1-4 $1,111.30 / RL
5-9 $1,018.00 / RL
10+ $940.35 / RL

Check availability 

This item may be sold in units of 1.

  • Brand name :  3M
  • Trade Name :  Cushion-Mount™ Plus
  • Series :  1020
  • Item Name :  Plate Mounting Tape
  • Short Desc :  TAPE,3M 1020 18.000"X 25YD ROLL
  • UPC :  00021200647826
  • UNSPSC :  31201505

This 0.02 Inch (0.51 mm) white, double coated foam tape with differential adhesion used to mount flexographic print plates. White, flexo plate mounting tape with differential adhesion.

Design & Construction
Color White 
Adhesive Type Differential Acrylate 
Liner Material Polycoated Kraft Paper 
Carrier Material Polyethylene Foam 
General Features
Storage Temperature 60 to 80 deg F 
Environmental Condition
Temperature Rating 120  deg F
Physical Properties
Width 18  Inch
Length 25  Yard
Thickness 2  Mil
Core Size 3 Inch 
Liner Thickness 0.0045  Inch

3M 1020 Cushion-Mount™ Plus Polyethylene Foam Plate Mounting Tape, 18" x 25 yd x 2 Mil, White Video URL 

3M 1020 Cushion-Mount™ Plus Polyethylene Foam Plate Mounting Tape, 18" x 25 yd x 2 Mil, White Technical Data Sheet 

Features :

  • Provides high quality standard combination print. The adhesives remove cleanly from the print plate and the print cylinder
  • Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality
  • The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press and clean plate removal when demounting
  • The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting
  • No air release and no consumer label
  • Composite sleeves and urethane sleeves
  • Standard plate side adhesion

Applications :

  • For Flexographic Plate Mounting, Print Industries