text.skipToContent text.skipToNavigation

Elantas PDG Elan-Guard® EM 59-50MR Single-Component Emulsion Hermetic Epoxy Impregnating Resin, 44 lb

ID: PDGEMGRC5950PAIL Mfr ID: PDGEMGRC5950PAIL
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Guard® EM 59-50MR Emulsion, Single-Component Hermetic Epoxy Impregnating Resin, Epoxy Base Type, 1.0748 g/cm3 (77 deg F (25 deg C)) Density, 4000 V/Mil (As Made ASTM D149), 3800 V/Mil (ASTM D149 After 24 hr in Water) Dielectric Strength, >94 deg C (ASTM D93) Flash Point, 4 hr At 150 deg C/302 deg F or 2 hr At 165 deg C/329 deg F Full Cure Time, 50 - 200 CP At 25 deg C/77 deg F Viscosity.

Select by Part Number

OR
Select Options Below
Container Size
This Item is Flagged for Deletion. To find out more about this item, please contact your local sales office or search for other options. This Item is Flagged for Deletion. You may view Suggested Replacements for this item, contact your local sales office or search for other options.
  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Guard®
  • Series :  Elan-Guard® EM 59-50MR
  • Item Name :  Hermetic Epoxy Impregnating Resin
  • Short Desc :  EPOXY EMULSION,EM 59-50MR 44-LB PL
  • UNSPSC :  13111001

EM 59-50MR is single component water based hermetic resin. In the liquid state it is a white opaque liquid.

Performance Details
Full Cure Time 4 hr at 150 deg C/302 deg F or 2 hr at 165 deg C/329 deg F 
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 12 Months 
Type Emulsion, Single-Component 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 4000  V/Mil
Chemical Properties
Viscosity 50  cP
Physical Properties
Container Size 44  lb
Container Type Pail 

Elantas PDG Elan-Guard® EM 59-50MR Single-Component Emulsion Hermetic Epoxy Impregnating Resin, 44 lb Brochure 

Elantas PDG Elan-Guard® EM 59-50MR Single-Component Emulsion Hermetic Epoxy Impregnating Resin, 44 lb Safety Data Sheet (SDS) 

Features :

  • Low viscosity
  • Thinned with water
  • UL recognized insulation systems from 130 deg C to 200 deg C
  • Excellent stability
  • Zero volatile organic compounds (VOC)
  • Dip-and-bake, roll dip application methods
  • This resin should be stored at 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 48 - 52% (ASTM D115) percent non-volatile matter
  • 52 Pounds at 25 deg C / 77 deg F, 37 Pounds at 107 deg C / 225 deg F helical coil bond strength (ASTM D2519)
  • < 1.0% (NEMA RE-2) freon resistance
  • 0.4 Mils film thickness
  • Secondary insulation
  • Dielectric Strength: 4000 V/Mil (As Made ASTM D149), 3800 V/Mil (ASTM D149 After 24 hr in Water)
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 50 - 200 CP at 25 deg C/77 deg F
  • Density: 1.0748 g/cm3 (77 deg F (25 deg C))
  • Viscosity: 50 - 200 cP

Applications :

  • Impregnation of Small and Large Hermetic Stators