text.skipToContent text.skipToNavigation

Elantas PDG Elan-Guard® EM 59-37MR Emulsion Hermetic Epoxy Impregnating Resin, 484 lb

ID: GRC5937MRDRUM Mfr ID: GRC5937MRDRUM
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Guard® EM 59-37MR Emulsion Hermetic Epoxy Impregnating Resin, Epoxy Base Type, 1.548 g/cm3 (25 deg C (77 deg F)) (1.013 hPa) Density, 5200 V/Mil (ASTM D149 - 0.2 Mil), 4750 V/Mil (ASTM D149 - 0.2 Mil) Dielectric Strength, >94 deg C (ASTM D93) Flash Point, 4 hr At 150 deg C/302 deg F or 2 hr At 165 deg C/329 deg F Full Cure Time, 20 - 50 CP At 25 deg C/77 deg F Viscosity.

Select by Part Number

OR
Select Options Below
Container Size

USD $8.95 / LB

Buy more and save

484-6291 $8.95 / LB
6292-12099 $7.53 / LB
12100+ $6.49 / LB

Check availability 

This item may be sold in units of 484.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Guard®
  • Series :  Elan-Guard® EM 59-37MR
  • Item Name :  Hermetic Epoxy Impregnating Resin
  • Short Desc :  EPOXY EMULSION,EM 59-37MR 484-LB DR
  • UNSPSC :  13110000

ELAN-Guard® EM 59-37MR is a single-component, water-borne epoxy emulsion.

Performance Details
Full Cure Time 4 hr at 150 deg C/302 deg F or 2 hr at 165 deg C/329 deg F 
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 12 Months 
Type Emulsion 
Net Weight 8.6 - 9.0 lb/gal 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 5200  V/Mil
Chemical Properties
Viscosity 20  cP
Physical Properties
Container Size 484  lb
Container Type Drum 

Elantas PDG Elan-Guard® EM 59-37MR Emulsion Hermetic Epoxy Impregnating Resin, 484 lb Brochure 

Elantas PDG Elan-Guard® EM 59-37MR Emulsion Hermetic Epoxy Impregnating Resin, 484 lb Safety Data Sheet (SDS) 

Features :

  • Excellent tank stability
  • Low viscosity for excellent penetration
  • High bond strength
  • UL recognized insulation systems up to class 200
  • No volatile organic compounds (VOC)
  • Dip-and-bake, roll through application methods
  • Store at 4 - 38 deg C / 40 - 100 deg F a dry controlled environment out of direct sunlight
  • Non-volatiles: 35 - 39% (ASTM D115)
  • 50 Pounds at 25 deg C / 77 deg F, 28 Pounds at 107 deg C / 225 deg F helical coil bond strength (ASTM D2519 over MW 35)
  • < 1.0% (NEMA RE-2) freon extractable material
  • Secondary insulation
  • Dielectric Strength: 5200 V/Mil (ASTM D149 - 0.2 Mil), 4750 V/Mil (ASTM D149 - 0.2 Mil)
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 20 - 50 CP at 25 deg C/77 deg F
  • Density: 1.548 g/cm3 (25 deg C (77 deg F)) (1.013 hPa)
  • Viscosity: 20 - 50 cP

Applications :

  • Impregnation of Motor Windings Used in Hermetic Compressors and Other Refrigeration Systems, Recommended for Any Application Requiring Resistance to Moisture or Harsh Chemicals