text.skipToContent text.skipToNavigation

Elantas PDG Elan-Tron® C 59 Hardener, 41 lb/5 gal

ID: PDGC595G Mfr ID: PDGC595G
Manufactured by: ELANTAS PDG, Inc.
Application Methods: Mix Resin and Hardener in recommended ratio until homogeneous. Apply with spatula, trowel or stiff brush. Products are filled and sold by weight and may contain less than the nominal volume of the container.

USD $23.76 / LB

Check availability 

This item may be sold in units of 41.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Tron®
  • Series :  Elan-Tron® C 59
  • Item Name :  Hardener
  • Short Desc :  HARDENER,C 59 41-LB/5-GAL PL
  • UNSPSC :  31201607

ELAN-Tron® C 59 Hardener is part of a filled, 100% solids, two-component epoxy resin systems

Performance Details
Full Cure Time 80 deg C/176 deg F For 10 - 20 min 
Gel Time 15  min
Design & Construction
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Net Weight 8.1 - 8.3 lb/gal 
Chemical Properties
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 11 (Parts By Weight) 18 (Parts By Volume) Hardener 
Viscosity - Part-B 10  cP
Physical Properties
Hardness 83 Shore D 
Container Size 41  lb
Container Type Pail 

Elantas PDG Elan-Tron® C 59 Hardener, 41 lb/5 gal Safety Data Sheet (SDS) 

Elantas PDG Elan-Tron® C 59 Hardener, 41 lb/5 gal Brochure 

Features :

  • Non-flowing paste
  • Room temperature cure
  • Mix resin and hardener in recommended ratio until homogeneous, apply with spatula, trowel or stiff brush application methods
  • <1% (ASTM D2566) linear shrinkage
  • 0.1% (ASTM D570 24 hours at 25 deg C / 77 deg F) water absorption
  • 105 deg C glass transition temperature
  • 55 ppm / deg C (below Tg), 160 ppm / deg C (above Tg) coefficient of thermal expansion
  • Volume Resistivity: 6.2 x 10^14 Ohm-cm at 25 deg C / 77 deg F
  • 2.6 at 1 kHz - 25 deg C / 77 deg F, 2.7 at 1 kHz - 100 deg C / 212 deg F, 3.4 at 1 kHz - 150 deg C / 302 deg F dielectric constant
  • 0.01 at 1 kHz - 25 deg C / 77 deg F, 0.01 at 1 kHz - 100 deg C / 212 deg F, 0.25 at 1 kHz - 150 deg C / 302 deg F dissipation factor
  • Gel Time: 5 - 10 min at 25 deg C/77 deg F
  • Container Size: 41 lb/5 gal
  • Flash Point: >94 deg C Resin, 99 deg C Hardener (ASTM D93)
  • Density: 0.9825 g/cm3 (25 deg C (77 deg F)) (1.013 hPa)
  • Viscosity - Part-B: 10 - 20 CP at 25 deg C/77 deg F
  • Gel Time: 15 - 30 min
  • Viscosity - Part-B: 10 - 20 cP

Applications :