text.skipToContent text.skipToNavigation

Elantas PDG Elan-Tron® C 49 Hardener, 13.25 lb/1 gal

ID: PDGC491G Mfr ID: PDGC491G
Manufactured by: ELANTAS PDG, Inc.
Mix Resin and Hardener in recommended ratio until homogenous. Apply with spatula, trowel or stiff brush. Products are filled and sold by weight and may contain less than the nominal volume of the container

USD $16.31 / LB

Buy more and save

13-171 $16.31 / LB
172-330 $13.73 / LB
331+ $11.86 / LB

In Stock

This item may be sold in units of 13.

  • Brand name :  Elantas Pdg
  • Trade Name :  Elan-Tron®
  • Series :  Elan-Tron® C 49
  • Item Name :  Hardener
  • Short Desc :  HARDENER,C 49 13.25-LB/1-GAL CAN
  • UNSPSC :  31201607

ELAN-Tron® C 49 Hardener is part of a filled, 100% solids, two-component epoxy resin systems.

Performance Details
Full Cure Time 3 hr at 65 deg C/140 deg F 
Design & Construction
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Net Weight 17.1 - 17.5 lb/gal 
Environmental Condition
Flash Point 62  deg C
Chemical Properties
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 110 (Parts By Weight) 86 (Parts By Volume) Hardener 
Viscosity - Part-B 220000  cP
Physical Properties
Hardness 85 Shore D 
Container Size 13.25  lb
Container Type Can 

Elantas PDG Elan-Tron® C 49 Hardener, 13.25 lb/1 gal Safety Data Sheet (SDS) 

Elantas PDG Elan-Tron® C 49 Hardener, 13.25 lb/1 gal Brochure 

Features :

  • Non-flowing paste
  • Room temperature cure
  • Mix resin and hardener in recommended ratio until homogeneous, apply with spatula, trowel or stiff brush application methods
  • 0.05% (ASTM D2566) linear shrinkage
  • 0.14% (ASTM D570, 24 hours at 25 deg C / 77 deg F) water absorption
  • 59 deg C (By DSC) glass transition temperature
  • 55 ppm / deg C (below Tg) coefficient of thermal expansion
  • 4.6 x 10^10 Ohm-cm at 25 deg C / 77 deg F, 6.0 x 10^9 Ohm-cm at 100 deg C / 212 deg F volume resistivity
  • 1.2% (24 hours at 180 deg C / 356 deg F) weight loss
  • 2.4 at 1 kHz - 25 deg C / 77 deg F, 3.5 at 1 kHz - 100 deg C / 212 deg F dielectric constant
  • 0.01 at 1 kHz - 25 deg C / 77 deg F, 0.11 at 1 kHz - 100 deg C / 212 deg F dissipation factor
  • Gel Time: 15 - 30 min (300 g) at 25 deg C/77 deg F, 4 - 8 min (Sunshine 15 g) at 80 deg C/176 deg F
  • Container Size: 13.25 lb/1 gal
  • Flash Point: >62 deg C (ASTM D93)
  • Density: 2.0710 g/cm3 (77 deg F (25 deg C))
  • Viscosity - Part-B: 220000 - 4200000 CP at 25 deg C/77 deg F (2 rpm), 90000 - 180000 CP at 25 deg C/77 deg F (20 rpm)
  • Viscosity - Part-B: 220000 - 4200000 cP

Applications :