text.skipToContentdvywebrxdaexsbxaacuerzafvfx text.skipToNavigation

Elantas PDG Elan-Tron® C 105 Hardener, 10 lb/1 gal

ID: PDGC1051G Mfr ID: PDGC1051G
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Tron® C 105 Hardener, Room Temperature Cure Type, 1.4679 g/cm3 (77 deg F (25 deg C)) Density, >94 deg C (ASTM D93) Flash Point, 10 - 16 hr Full Cure Time, 7 - 10 min At 110 deg C/230 deg F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio.
Special Handling Required



USD $37.56 / LB

Buy more and save

10-39 $37.56 / LB
40-129 $31.63 / LB
130-199 $30.71 / LB
200-249 $27.32 / LB
250+ $26.47 / LB

Check availability 

This item may be sold in units of 10.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Tron®
  • Series :  Elan-Tron® C 105
  • Item Name :  Hardener
  • Short Desc :  HARDENER,C 105 10-LB/1-GAL CAN
  • UNSPSC :  31201607

ELAN-Tron™ E 451 / C 105 is a two-component, room temperature curing, 100%-solids epoxy resin system.

Performance Details
Full Cure Time 10 - 16 hr 
Gel Time 7  min
Design & Construction
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Net Weight 12.0 - 12.4 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Mixing Ratio 100 (Parts By Weight) 
Physical Properties
Hardness 67 Shore D 
Container Size 10  lb
Container Type Can 

Elantas PDG Elan-Tron® C 105 Hardener, 10 lb/1 gal Safety Data Sheet (SDS) 

Elantas PDG Elan-Tron® C 105 Hardener, 10 lb/1 gal Brochure 

Features :

  • Convenient 1:1 volume mix ratio
  • Thixotropic for vertical surfaces
  • Room temperature or low bake cure
  • Long pot life
  • Chemical and moisture resistant
  • Brush, spatula or putty knife application methods
  • 1-1/2 hr at 25 deg C / 77 deg F - 250g pot life
  • + 0.2% (24 hours at 25 deg C / 77 deg F), + 0.4% (24 hours in boiling water) water absorption
  • 0.9% (24 hours at 180 deg C / 356 deg F) weight loss
  • Thixotropic paste viscosity
  • Gel Time: 30 - 50 min at 25 deg C/77 deg F (200 ml)
  • Container Size: 10 lb/1 gal
  • Flash Point: >94 deg C (ASTM D93)
  • Density: 1.4679 g/cm3 (77 deg F (25 deg C))
  • Gel Time: 7 - 10 min

Applications :