Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, 55 g, Black
ID: DOLCB112855GM | Mfr ID: DOLCB112855GMManufactured by: Von Roll / John C Dolph

Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, Room Temperature Cure Type, 8.8 - 9.0 lb/gal At 77 deg F (25 deg C) Density, 665 V/Mil Dielectric Strength, 2 - 4 hr At 77 deg F Full Cure Time, 45 Shore A At 70 deg F Hardness, 100:6 By Weight Mixing Ratio, 130 deg C Temperature Rating, 1260 psi Tensile Strength, 12.2 x 10^-4 Cal/sec/cm^2/deg C/cm Thermal Conductivity, 100000 cps At 80 deg F, 10 rpm Viscosity.
Container Size
USD $31.61 / BOT
Buy more and save
1-109 | $31.61 / BOT |
110-274 | $26.63 / BOT |
275-549 | $21.36 / BOT |
550+ | $19.28 / BOT |
- Brand name :  Von Roll John C Dolph
- Trade Name :  Dolphon®
- Series :  Dolphon® CB-1128-B
- Item Name :  Flexible Motor Compound
- Short Desc :  REACTOR,CB-1128-B (F/2LB KIT) 55-GRAM
- UNSPSC :  13111000
CB-1128 is a unique, two part resin formulated for motor and generator encapsulation. It is available in pre-packaged kits and bulk.
Performance Details
Full Cure Time | 2 - 4 hr at 77 deg F |
Tensile Strength | 1260 psi |
Design & Construction
Color | Black |
Form | Liquid |
Cure Type | Room Temperature |
General Features
Type | Two-Part |
Environmental Condition
Temperature Rating | 130 deg C |
Electrical Properties
Dielectric Strength | 665 V/Mil |
Chemical Properties
Viscosity | 100000 cP |
Mixing Ratio | 100:6 By Weight |
Physical Properties
Hardness | 45 Shore A at 70 deg F |
Container Size | 55 g |
Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, 55 g, Black Safety Data Sheet (SDS)
Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, 55 g, Black Specification Sheet
Features :
- Excellent impact and abrasion resistance
- Excellent thermal conductivity
- Superior water, moisture and chemical resistance
- Flexible over wide temperature ranges (65 to 155 deg C)
- Brush or spray applications
- Withstands thermal shock
- Forms protective seal coat
- Tough and flexible
- Works well in harsh environments
- Excellent resistance to chemical attack
- Crack resistant, Salt resistant
- 3.06 x 10^14 Ohms surface resistivity
- 1.78 x 10^15 Ohm-cm volume resistivity
- 0.01% (ASTM D-570-59aT) water absorption
- Viscosity: 100000 cps at 80 deg F, 10 rpm
- Density: 8.8 - 9.0 lb/gal at 77 deg F (25 deg C)
- Thermal Conductivity: 12.2 x 10^-4 Cal/sec/cm^2/deg C/cm
Applications :
- Sand Pits
- Stone Quarries
- Cement Plants
- Meat Packing Plants
- Canneries
- Poultry Processing Plants
- Dairies
- Breweries
- Telecommunications
- Wood Pulp Plants
- Paper Mills
- Textile Mills
- Dyeing Plants
- Wind Mills
- Automotive (On and Off-Road) Applications
- Marine Applications