text.skipToContent text.skipToNavigation

3M 5419 Low Static Polyimide Film Tape, 1" x 36 yd x 2.7 Mil, Gold, 9/Case

ID: 3M5419X1 Mfr ID: 70016050687
Manufactured by: 3M Industrial Adhesives and Tapes
3M low static polyimide film tape 5419 is a translucent, polyimide film-backed silicone adhesive tape with unique and extremely low electrostatic discharge properties. Use 3M tape 5419 to mask printed circuit boards during wave solder or solder dip process.
Special Handling Required



Select by Part Number

OR
Select Options Below
Width

USD $104.87 / RL

Buy more and save

1-11 $104.87 / RL
12-23 $94.59 / RL
24-47 $86.14 / RL
48+ $73.09 / RL

In Stock

This item may be sold in units of 1.

  • Brand name :  3M
  • Series :  5419
  • Item Name :  Film Tape
  • Short Desc :  TAPE,3M 5419 1.000"X 36YD ROLL AMB
  • Packaging :  9/Case
  • UPC :  00021200648663
  • UNSPSC :  31201503

At room temperature the properties of polyimide and polyester film are similar. However, as the temperature increases or decreases, the properties of the polyimide film are less affected than polyester.

WARNING

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Performance Details
Adhesive Strength 20  oz/Inch
Tensile Strength 33  lb/Inch
Elongation 60% 
Design & Construction
Color Gold 
Adhesive Type Silicone 
Backing Material Polyimide 
Applicable Material Steel 
General Features
Shelf Life 36 Months 
Type Low Static 
Storage Temperature 16 to 27 deg C 
Environmental Condition
Temperature Rating 260  deg C
Flame Retardant Yes 
Electrical Properties
Dielectric Strength 7000  V
Physical Properties
Length 36  Yard
Thickness 2.7  Mil
Width 1  Inch
Core Size 3 Inch 

3M 5419 Low Static Polyimide Film Tape, 1" x 36 yd x 2.7 Mil, Gold, 9/Case Technical Data Sheet 

Features :

  • Polyimide film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures
  • Gold tab protection during wave solder of printed circuit boards
  • Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB
  • 10^6 ohm insulation resistance
  • Temperature rating of -73 to 260 deg C

Applications :

  • For Printed Circuit Boards during Wave Solder or Solder Dip Process, Fabrication of Parts