text.skipToContent
dvywebrxdaexsbxaacuerzafvfx
text.skipToNavigation

Elantas PDG Epoxylite® Single-Component Hight-Voltage Epoxy VPI Resin, 3170 lb/330 gal

ID: EPOE577LVX3170LB Mfr ID: EPOE577LVX3170LB
Manufactured by: ELANTAS PDG, Inc.
Epoxylite® E 577 is a single-component, heat cured, epoxy resin system designed for use with uncatalyzed tapes. Vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods.

Select by Part Number

OR
Select Options Below
Container Size
Type
Select for Quotation
  • Brand name :  Elantas PDG
  • Trade Name :  Epoxylite®
  • Series :  Epoxylite® E577LV
  • Item Name :  Epoxy VPI Resin
  • Short Desc :  RESIN,VPI,E577LV 3170LB/330G TOTE
  • UNSPSC :  13111001

The industry standard for the high voltage power generation industry. Offers thermal ratings up to 200 deg C. Chemical-resistant for operation in corrosive environments. Excellent stability.

Performance Details
Full Cure Time 8 hr at 163 deg C/325 deg F 
Gel Time 10  min
Design & Construction
Base Type Epoxy 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Single-Component, High Voltage 
Net Weight 9.4 - 9.8 lb/gal 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 4100  V/Mil
Chemical Properties
Viscosity 1000  cP
Physical Properties
Hardness 85 Shore D at 25 deg C/77 deg F 
Container Size 3170  lb
Container Type Tote 

Elantas PDG Epoxylite® Single-Component Hight-Voltage Epoxy VPI Resin, 3170 lb/330 gal Brochure 

Features :

  • No separate catalyst required. Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 128 deg C glass transition temperature
  • 52 ppm / deg C (below Tg), 203 ppm / deg C (above Tg) coefficient of thermal expansion
  • > 1 x 10^16 ohm-cm (ASTM D257 - 25 deg C / 77 deg F) volume resistivity
  • 0.004 at 1 kHz - 25 deg C / 77 deg F, 0.06 at 1 kHz - 100 deg C / 212 deg F, 0.01 at 1 kHz - 150 deg C / 302 deg F, 0.40 at 1 kHz - 200 deg C / 392 deg F dissipation factor (ASTM D150)
  • 3.2 at 1 kHz - 25 deg C / 77 deg F, 3.3 at 1 kHz - 100 deg C / 212 deg F, 3.5 at 1 kHz - 150 deg C / 302 deg F, 4.6 at 1 kHz - 200 deg C / 392 deg dielectric constant (ASTM D150)
  • Secondary insulation
  • Gel Time: 10 - 20 min at 150 deg C/302 deg F (Sunshine)
  • Container Size: 3170 lb/330 gal
  • Dielectric Strength: 4100 V/Mil at ASTM D149 - 0.3 Mil, 3600 at ASTM D149 - 0.3 Mil After 24 hr in Water
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 1000 - 3000 CP at 25 deg C/77 deg F
  • Gel Time: 10 - 20 min
  • Viscosity: 1000 - 3000 cP

Applications :

  • Impregnation of High Voltage Motors and Generators Up to 13.8 kV