text.skipToContent text.skipToNavigation

Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, 528 lb/55 gal

ID: B9116528LB Mfr ID: B9116528LB
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, Epoxy Base Type, 2900 V/Mil At ASTM D149 - 4 Mil, 2650 V/Mil At ASTM D149 - 4 Mil (After 24 hr in Water) Dielectric Strength, >94 deg C (ASTM D93) Flash Point, 2 hr At 163 deg C/325 deg F or four hr At 149 deg C/300 deg F Full Cure Time, 10 - 30 min At 165 deg C/329 deg F (Sunshine) Gel Time, 80 Shore D At 25 deg C/77 deg F Hardness, 10000 - 14000 CP At 25 deg C/77 deg F, 2 rpm, 3000 - 5000 CP At 25 deg C/77 deg F, 20 rpm Viscosity.
Special Handling Required



USD $14.23 / LB

Buy more and save

528-6863 $14.23 / LB
6864-13199 $11.98 / LB
13200+ $10.35 / LB

Check availability 

This item may be sold in units of 528.

  • Brand name :  Elantas Pdg
  • Trade Name :  RanVar™
  • Series :  RanVar™ B9-116
  • Item Name :  Epoxy VPI Resin
  • Short Desc :  EPOXY,B9-116 528LB/55GL DR
  • UNSPSC :  13111001

RanVar™ B9-116 is a single-component, heat cured, epoxy impregnating resin.

WARNING

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Performance Details
Full Cure Time 2 hr at 163 deg C/325 deg F or 4 hr at 149 deg C/300 deg F 
Gel Time 10  min
Design & Construction
Base Type Epoxy 
General Features
Shelf Life 6 Months 
Type Single-Component 
Net Weight 9.6 - 9.9 lb/gal 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 2900  V/mil
Chemical Properties
Viscosity 10000  cP
Physical Properties
Hardness 80 Shore D at 25 deg C/77 deg F 
Container Size 528  lb
Container Type Drum 

Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, 528 lb/55 gal Brochure 

Features :

  • High flash point
  • Excellent chemical resistance and elevated temperature bond strength
  • Refrigerant-resistant
  • Thixotropic for high build and improved resin retention
  • No separate catalyst required
  • UL recognized insulation systems up to class 220
  • Dip-and-bake, vacuum impregnation, vacuum-pressure impregnation application methods
  • 57 Pounds at 25 deg C / 77 deg F, 14 Pounds at 150 deg C / 302 deg F helical coil bond strength (ASTM D2519)
  • <1% (NEMA RE-2) freon extractable material
  • Secondary insulation
  • Container Size: 528 lb/55 gal
  • Dielectric Strength: 2900 V/Mil at ASTM D149 - 4 Mil, 2650 V/Mil at ASTM D149 - 4 Mil (After 24 hr in Water)
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 10000 - 14000 CP at 25 deg C/77 deg F, 2 rpm, 3000 - 5000 CP at 25 deg C/77 deg F, 20 rpm
  • Gel Time: 10 - 30 min
  • Viscosity: 10000 - 14000 cP

Applications :

  • For Impregnation of Transformers, Motor Windings and Form-Wound Coils