text.skipToContent text.skipToNavigation

Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin, Blue

ID: EPO211SK Mfr ID: EPO211SK
Manufactured by: ELANTAS PDG, Inc.
ELAN-Tron® E 211 blue resin/C 301 hardener is a 100%-solids, two-component epoxy system. It is available as individual components or in 100-gram pre-measured kits (ELAN-Tron® E 211 Blue Epoxy Kit).

USD $41.37 / EA

Buy more and save

1-12 $41.37 / EA
13-24 $34.84 / EA
25+ $30.09 / EA

In Stock

This item may be sold in units of 1.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Tron®
  • Series :  Elan-Tron® E211
  • Item Name :  Epoxy Sealer Resin
  • Short Desc :  SEALER,E 211,BLUE INDIVDUAL KIT
  • UNSPSC :  13111001

Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin Kit.

Performance Details
Full Cure Time 2 hr at 80 deg C/175 deg F 
Tensile Strength 8500  psi
Design & Construction
Base Type Epoxy 
Color Blue 
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 12.1 - 12.5 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Mixing Ratio 100 (Parts By Weight) Resin, 6.5 (Parts By Weight) Hardener 
Viscosity - Part-A 60000  cP
Viscosity - Part-B 5  cP
Physical Properties
Container Type Kit 

Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin, Blue Brochure 

Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin, Blue Safety Data Sheet (SDS) 

Features :

  • Electrically insulating, abrasion-resistant
  • Brushable for high build-up with a single application
  • Excellent resistance to chemicals and moisture
  • Room temperature cure
  • Brush, spatula application methods
  • Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 30 min at 25 deg C / 77 deg F Pot life
  • 3200 PSI at 25 deg C / 77 deg F lap shear strength
  • 0.1% (24 hours at 25 deg C / 77 deg F) water absorption
  • Flash Point: >94 deg C (ASTM D93)
  • Density: 1.4760 g/cm3 (77 deg F (25 deg C))
  • Viscosity - Part-B: 5 - 10 CP at 25 deg C/77 deg F
  • Tensile Strength: 8500 psi at 25 deg C/77 deg F
  • Viscosity - Part-A: 60000 - 90000 cP
  • Viscosity - Part-B: 5 - 10 cP

Applications :

  • Chokes
  • Toroids
  • Ballast Insulation
  • Power Supplies
  • Electromagnetic Devices
  • Lifting Magnets
  • Protective Coating
  • Sealant and Adhesive for Metals
  • Plastics
  • Ceramics and Other Surfaces
  • Casting or Potting of Small Electrical Components
  • Preparation of Epoxy-Glass Laminates