text.skipToContent text.skipToNavigation

Elantas PDG RanVar™ B2-202 Two-Component Epoxy Resin System, 1.97 lb/1 qt

ID: B2202QT Mfr ID: B2202QT
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG RanVar™ B2-202 Two-Component Epoxy Resin System, Epoxy Base Type, Room Temperature Cure Type, >94 deg C (ASTM D93) Flash Point, 2 hr At 80 deg C/176 deg F (Allow to Harden) or 2 hr At 66 deg C/150 deg F (Allow 24 hr) Full Cure Time, 30 - 60 min At 25 deg C/77 deg F (240 g) Gel Time, 100 (Parts By Weight And Volume) Resin, 20 (Parts By Weight) 23 (Parts By Volume) Hardener Mixing Ratio, 2000 - 4000 CP At 25 deg C/77 deg F Viscosity, 4500 - 8500 CP At 25 deg C/77 deg F Viscosity - Part-A, 100 - 200 CP At 25 deg C/75 deg F Viscosity - Part-B.
Special Handling Required



USD $64.68 / QT

Buy more and save

1-12 $64.68 / QT
13-24 $54.47 / QT
25+ $47.04 / QT

Check availability 

This item may be sold in units of 1.

  • Brand name :  Elantas Pdg
  • Trade Name :  RanVar™
  • Series :  RanVar™ B2-202
  • Item Name :  Epoxy Resin System
  • Short Desc :  RESIN,EPOXY FILLED,B2-202 1.97-LB QT
  • UNSPSC :  13111001

RanVar™ B2-202 is a filled, 100%-solids, two-component epoxy resin system.

WARNING

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Performance Details
Full Cure Time 2 hr at 80 deg C/176 deg F (Allow - Harden) or 2 hr at 66 deg C/150 deg F (Allow 24 hr) 
Gel Time 30  min
Design & Construction
Base Type Epoxy 
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 9.6 - 10.0 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Viscosity 2000  cP
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 20 (Parts By Weight) 23 (Parts By Volume) Hardener 
Viscosity - Part-A 4500  cP
Viscosity - Part-B 100  cP
Physical Properties
Container Size 1.97  lb

Elantas PDG RanVar™ B2-202 Two-Component Epoxy Resin System, 1.97 lb/1 qt Brochure 

Elantas PDG RanVar™ B2-202 Two-Component Epoxy Resin System, 1.97 lb/1 qt Safety Data Sheet (SDS) 

Features :

  • Room temperature or low heat cure
  • Short gel time for rapid processing
  • Moisture and chemical-resistant
  • Meets Siemens specification 53842GP
  • Spatula or stiff brush application methods
  • Secondary insulation
  • Gel Time: 30 - 120 min at 25 deg C/77 deg F
  • Container Size: 1.97 lb/1 qt
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 2000 - 4000 CP at 25 deg C/77 deg F
  • Viscosity - Part-B: 100 - 200 CP at 25 deg C/75 deg F
  • Gel Time: 30 - 60 min
  • Viscosity: 2000 - 4000 cP
  • Viscosity - Part-A: 4500 - 8500 cP
  • Viscosity - Part-B: 100 - 200 cP

Applications :

  • Excellent Bonding Resin for End Turn Bracing in the Manufacture and Repair of Turbine Generators, General-Purpose Adhesive for Bonding of Electrical Components