MFR #:198228
EIS #:DOLCB107712LB
MFR #:198228
EIS #:DOLCB107712LB
Out of Stock
Min Qty:1
|Qty Increment:1
more info
CB-1077 is a black epoxy potting and casting resin with very high thermal conductivity for use in all types if electrical and electronic assemblies.
Von Roll/John C Dolph Dolphon® CB-1077 Epoxy Potting And Casting Resin, Epoxy Base Type, Room Temperature Cure Type, 160 V/Mil (ASTM D-149, 1/8 Inch Specimen) Dielectric Strength, 80 - 85 Shore D (ASTM D 2240) Hardness, 100 By Weight, or By Volume Mixing Ratio, 8 BTU/HR/ft²/Inch/°F (ASTM C-3111) Thermal Conductivity, 30000 - 50000 cps At 77 °F (25 °C) ASTM D2196 Viscosity.
Requires Quote / US pound
Min Qty:1
|Qty Increment:1
more info
CB-1077 is a black epoxy potting and casting resin with very high thermal conductivity for use in all types if electrical and electronic assemblies.
Von Roll/John C Dolph Dolphon® CB-1077 Epoxy Potting And Casting Resin, Epoxy Base Type, Room Temperature Cure Type, 160 V/Mil (ASTM D-149, 1/8 Inch Specimen) Dielectric Strength, 80 - 85 Shore D (ASTM D 2240) Hardness, 100 By Weight, or By Volume Mixing Ratio, 8 BTU/HR/ft²/Inch/°F (ASTM C-3111) Thermal Conductivity, 30000 - 50000 cps At 77 °F (25 °C) ASTM D2196 Viscosity.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameEpoxy Potting and Casting Resin
Trade NameDolphon®
SeriesDolphon® CB-1077
Design & Construction
Base TypeEpoxy
ColorBlack
Cure TypeRoom Temperature
Chemical Properties
Viscosity30000 cP
Mixing Ratio100 By Weight, or By Volume
Electrical Properties
Dielectric Strength160 V/mil
Physical Properties
Container Size12 lb
Container TypeCan
Hardness80 - 85 Shore D (ASTM D2240)
Features
- Room temperature cure and heat curing reactors available
- Excellent thermal conductivity
- Excellent electrical properties
- Low shrinkage
- Good impact resistance
- >1.0x 10^16 ohm-cm (ASTM D-257) volume resistivity
- 4.29 at 23 °C, 1 kHz (ASTM D-150) dielectric constant
- 0.0056 at 23 °C, 1 kHz (ASTM D-150) dissipation factor
- Dielectric Strength: 160 V/Mil (ASTM D-149, 1/8 Inch Specimen)
- Viscosity: 30000 - 50000 cps at 77 °F/25 °C ASTM D2196
- Thermal Conductivity: 8 BTU/HR/ft²/Inch/°F (ASTM C-3111)
- Viscosity: 30000 - 50000 cP
Applications
- Relays and Coils
- Sensor
- Transformer
- Motors
- Ballast Insulation