text.skipToContent text.skipToNavigation

Elantas PDG RanVar™ TR327-3B Two-Component Epoxy Motor Sealer Hardener, 50 lb/5 gal (Part-B)

ID: RANTR327-3B5G Mfr ID: RANTR327-3B5G
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG RanVar™ TR327-3B Two-Component Epoxy Motor Sealer Hardener, Epoxy Base Type, Room Temperature Cure Type, 1.4966 g/cm3 (77 deg F (25 deg C)) Resin, 1.5613 g/cm3 (77 deg F (25 deg C)) Hardener Density, >94 deg C (ASTM D93) Flash Point, Within 2 - 3 hr Full Cure Time, 50 - 100 min At 25 deg C/77 deg F (250 g) Gel Time, 55 - 60 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio, >3000 psi At 25 deg C/77 deg F Tensile Strength, 57000 - 77000 cps At 25 deg C/77 deg F Viscosity - Part-A, 40000 - 80000 cps At 25 deg C / 77 deg F Viscosity - Part-B.

USD $13.71 / LB

Buy more and save

50-649 $13.71 / LB
650-1249 $11.55 / LB
1250+ $9.97 / LB

Check availability 

This item may be sold in units of 50.

  • Brand name :  Elantas Pdg
  • Trade Name :  RanVar™
  • Series :  RanVar™ TR327-3B
  • Item Name :  Epoxy Motor Sealer Hardener
  • Short Desc :  HARDENER,PART B,TR327-3B 50-LB/5-GAL PL
  • UNSPSC :  31201607

RanVar™ TR-327-3 is a two-component, room temperature cure, mineral-filled epoxy system.

WARNING

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Performance Details
Full Cure Time Within 2 - 3 hr 
Gel Time 50  min
Tensile Strength 3000  psi
Design & Construction
Base Type Epoxy 
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 12.2 - 12.6 lb/gal Resin, 12.7 - 13.1 lb/gal Hardener 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Mixing Ratio 100 (Parts By Weight) 
Viscosity - Part-A 57000  cP
Viscosity - Part-B 40000  cP
Physical Properties
Hardness 55 - 60 Shore D 
Container Size 50  lb
Container Type Pail 

Elantas PDG RanVar™ TR327-3B Two-Component Epoxy Motor Sealer Hardener, 50 lb/5 gal (Part-B) Safety Data Sheet (SDS) 

Elantas PDG RanVar™ TR327-3B Two-Component Epoxy Motor Sealer Hardener, 50 lb/5 gal (Part-B) Brochure 

Features :

  • Highly thixotropic paste - non-sagging during cure
  • Room temperature or heat cure
  • Protects windings from environmental contaminants such as grit, moisture and abrasives
  • Chemical and moisture resistant
  • Spatula or stiff brush application methods
  • Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 5.5 x 10^13 ohm-cm at 25 deg C / 77 deg F volume resistivity
  • 3.6 at 1 kHz - 25 deg C / 77 deg F dielectric constant
  • 0.2% (24 hours at 25 deg C / 77 deg F) water absorption
  • Secondary insulation
  • Container Size: 50 lb/5 gal
  • Flash Point: >94 deg C (ASTM D93)
  • Density: 1.4966 g/cm3 (77 deg F (25 deg C)) Resin, 1.5613 g/cm3 (77 deg F (25 deg C)) Hardener
  • Viscosity - Part-B: 40000 - 80000 cps at 25 deg C / 77 deg F
  • Tensile Strength: >3000 psi at 25 deg C/77 deg F
  • Gel Time: 50 - 100 min
  • Viscosity - Part-A: 57000 - 77000 cP
  • Viscosity - Part-B: 40000 - 80000 cP

Applications :

  • Highly Thixotropic Paste - Non-Sagging During Cure, Room Temperature or Heat Cure, Protects Windings from Environmental Contaminants Such as Grit, Moisture and Abrasives, Chemical and Moisture-Resistant