text.skipToContent text.skipToNavigation

Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, 450 lb

ID: 447001DRUM Mfr ID: 447001DRUM
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.1731 g/cm3 (77 deg F (25 deg C)) Density, 4900 V/Mil At ASTM D149 - 0.9 Mil, 4200 V/Mil At ASTM D149 - 0.9 Mil (After 24 hr in Water) Dielectric Strength, >93 deg C (ASTM D93) Flash Point, 4 - 8 hr At 165 deg C/329 deg F Full Cure Time, 5 - 11 min At 150 deg C (Sunshine) Gel Time, 400 - 850 CP At 25 deg C/77 deg F Viscosity.

USD $16.47 / LB

Buy more and save

450-5849 $16.47 / LB
5850-11249 $13.87 / LB
11250+ $11.98 / LB

Check availability 

This item may be sold in units of 450.

  • Brand name :  Elantas PDG
  • Trade Name :  ELtherpox™
  • Series :  ELtherpox™ 44-7001
  • Item Name :  Epoxy Impregnating Resin
  • Short Desc :  ELTHERPOX,447001 450-LB DR
  • UNSPSC :  13111001

ELtherpox™ 447001 is a single-component, unfilled, medium viscosity epoxy resin.

Performance Details
Full Cure Time 4 - 8 hr at 165 deg C/329 deg F 
Gel Time 5  min
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 3 Months 
Type Single-Component 
Net Weight 9.3 - 9.9 lb/gal 
Environmental Condition
Flash Point 93  deg C
Electrical Properties
Dielectric Strength 4900  V/Mil
Chemical Properties
Viscosity 400  cP
Physical Properties
Container Size 450  lb
Container Type Drum 

Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, 450 lb Brochure 

Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, 450 lb Safety Data Sheet (SDS) 

Features :

  • Excellent bond strength
  • Low VOC level
  • Chemical-resistant
  • Eltherpox™ 447001 cures to a clear, tough, electrically-insulating film
  • Dip-and-bake, vacuum-pressure Impregnation application methods
  • 77 Pounds at 25 deg C / 77 deg F, 20 Pounds at 150 deg C / 302 deg F helical coil bond strength over MW 35
  • 80 deg C (DSC) glass transition temperature
  • 3.4 at 1 kHz - 25 deg C, 3.4 at 1 kHz - 50 deg C, 3.5 at 1 kHz - 100 deg C, 3.9 at 1 kHz - 100 deg C dielectric constant
  • 0.006 at 1 kHz - 25 deg C, 0.006 at 1 kHz - 50 deg C, 0.008 at 1 kHz - 100 deg C, 0.06 at 1 kHz - 100 deg C dissipation factor
  • 3 x 10^16 ohm-cm at 25 deg C volume resistivity
  • Secondary insulation
  • Gel Time: 10 - 15 min at 125 deg C/257 deg F (Sunshine)
  • Dielectric Strength: 4900 V/Mil at ASTM D149 - 0.9 Mil, 4200 V/Mil at ASTM D149 - 0.9 Mil (After 24 hr in Water)
  • Flash Point: >93 deg C (ASTM D93)
  • Viscosity: 400 - 850 CP at 25 deg C/77 deg F
  • Density: 1.1731 g/cm3 (77 deg F (25 deg C))
  • Gel Time: 5 - 11 min
  • Viscosity: 400 - 850 cP

Applications :

  • For Impregnation of Form Wound and Random Wound Motor Coils