text.skipToContent text.skipToNavigation

Elantas PDG Elan-Guard® EM 59-60MR Single-Component Emulsion Epoxy Hermetic Resin, 475 lb

ID: PDGEMGRC596055G Mfr ID: PDGEMGRC596055G
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Guard® EM 59-60MR Single-Component, Emulsion Epoxy Hermetic Resin, Epoxy Base Type, 1.0916 g/cm3 (77 deg F (25 deg C)) Density, 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water) Dielectric Strength, 100 deg C Flash Point, 4 hr At 150 deg C/302 deg F or 2 hr At 165 deg C/329 deg F Full Cure Time, 500 - 1500 CP At 25 deg C/77 deg F Viscosity.

USD $12.16 / LB

Buy more and save

475-5849 $12.16 / LB
5850-11249 $10.24 / LB
11250+ $8.84 / LB

In Stock

This item may be sold in units of 475.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Guard®
  • Series :  Elan-Guard® EM 59-60MR
  • Item Name :  Epoxy Hermetic Resin
  • Short Desc :  EPOXY EMULSION EM 59-60MR 475 LB-DR
  • UNSPSC :  13111001

EM 59-60MR is single component water based hermetic resin. In the liquid state it is a white opaque liquid.

Performance Details
Full Cure Time 4 hr at 150 deg C/302 deg F or 2 hr at 165 deg C/329 deg F 
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 12 Months 
Type Single-Component, Emulsion 
Environmental Condition
Flash Point 100  deg C
Electrical Properties
Dielectric Strength 3500  V/Mil
Chemical Properties
Viscosity 500  cP
Physical Properties
Container Size 450  lb
Container Type Drum 

Elantas PDG Elan-Guard® EM 59-60MR Single-Component Emulsion Epoxy Hermetic Resin, 475 lb Brochure 

Elantas PDG Elan-Guard® EM 59-60MR Single-Component Emulsion Epoxy Hermetic Resin, 475 lb Safety Data Sheet (SDS) 

Features :

  • Low viscosity
  • Thinned with water
  • UL recognized insulation systems from 130 deg C to 200 deg C
  • Excellent stability
  • Zero volatile organic compounds (VOC)
  • Dip-and-bake, roll dip application methods
  • This resin should be stored at 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 58 - 62% (ASTM D115) percent non-volatile matter
  • 65 Pounds at 25 deg C / 77 deg F, 38 Pounds at 107 deg C / 225 deg F helical coil bond strength (ASTM D2519)
  • < 1.0% (NEMA RE-2) freon resistance
  • 1.1 Mils film thickness
  • Secondary insulation
  • Dielectric Strength: 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water)
  • Viscosity: 500 - 1500 CP at 25 deg C/77 deg F
  • Density: 1.0916 g/cm3 (77 deg F (25 deg C))
  • Viscosity: 500 - 1500 cP

Applications :

  • Impregnation of Small and Large Hermetic Stators