text.skipToContent text.skipToNavigation

Elantas PDG Elan-Cast® C-295 Two-Component Epoxy Hardener, 40 lb/5 gal

ID: C29540LB Mfr ID: C29540LB
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Cast® C 295 Two-Component Epoxy Hardener, Epoxy Base Type, 1.2640 g/cm3 (77 deg F (25 deg C)) Density, 530 V/Mil At 25 deg C/77 deg C (60 Mil), 490 V/Mil At 25 deg C/77 deg C (60 Mil) After 24 hr in Water Dielectric Strength, > 80% At 25 deg C/77 deg F Elongation, >94 deg C (ASTM D93) Flash Point, 4 hr At 80 deg C/176 deg F + 4 hr At 120 deg C/248 deg F + 4 hr At 150 deg C/302 deg F Full Cure Time, 150 - 180 min At 125 deg C/77 deg F Gel Time, 65 - 70 Shore D At 25 deg C/77 deg F (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 100 (Parts By Weight) 101 (Parts By Volume) Hardener Mixing Ratio, 400 psi At 25 deg C/77 deg F Tensile Strength, 0.2 - 0.3 W/mK (ASTM C518) Thermal Conductivity, 50000 - 70000 CP At 25 deg C/77 deg F (ASTM D2196), 2000 - 4000 CP At 55 deg C/194 deg F (ASTM D2196) Viscosity, 3000 - 11000 CP At 25 deg C/77 deg F Viscosity - Part-A.

USD $42.93 / LB

Buy more and save

40-519 $42.93 / LB
520-999 $36.15 / LB
1000+ $31.22 / LB

Check availability 

This item may be sold in units of 40.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Cast®
  • Series :  Elan-Cast® C-295
  • Item Name :  Epoxy Hardener
  • Short Desc :  HARDENER,C 295 40LB/5-GAL
  • UNSPSC :  31201607

ELAN-Cast® E 295 black/C 295 epoxy is a two-component, heat-cured, 100%-solids resin system, bench casting / potting, vacuum casting / potting application methods.

Performance Details
Elongation > 80% at 25 deg C/77 deg F 
Full Cure Time 4 hr at 80 deg C/176 deg F + 4 hr at 120 deg C/248 deg F + 4 hr at 150 deg C/302 deg F 
Gel Time 150  min
Tensile Strength 400  psi
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 10.4 - 10.8 lb/gal 
Environmental Condition
Flash Point 94  deg C
Electrical Properties
Dielectric Strength 530  V/Mil
Chemical Properties
Viscosity 50000  cP
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 100 (Parts By Weight) 101 (Parts By Volume) Hardener 
Viscosity - Part-A 3000  cP
Physical Properties
Hardness 65 - 70 Shore D at 25 deg C/77 deg F (ASTM D2240) 
Container Size 40  lb

Elantas PDG Elan-Cast® C-295 Two-Component Epoxy Hardener, 40 lb/5 gal Safety Data Sheet (SDS) 

Elantas PDG Elan-Cast® C-295 Two-Component Epoxy Hardener, 40 lb/5 gal Brochure 

Features :

  • Excellent electrical properties
  • Semi-rigid for thermal shock resistance
  • Convenient 1:1 volume mix ratio
  • Suitable for class 155 service
  • 44 deg C (TMA) glass transition temperature
  • 45 ppm/ deg C (below Tg), 135 ppm/ deg C (above Tg) coefficient of thermal expansion
  • 0.03 at kHz - 25 deg C / 77 deg F, 0.07 at 1 kHz - 100 deg C / 212 deg F, 0.38 at 1 kHz - 150 deg C / 302 deg F dissipation factor
  • 4.1 at kHz - 25 deg C / 77 deg F, 4.3 at 1 kHz - 100 deg C / 212 deg F, 6.4 at 1 kHz - 150 deg C / 302 deg F dielectric constant
  • 3.7 x 10^10 ohm-cm at 25 deg C / 77 deg F volume resistivity
  • Gel Time: 5 - 10 min at 25 deg C/77 deg F
  • Container Size: 40 lb/5 gal
  • Dielectric Strength: 530 V/Mil at 25 deg C/77 deg C (60 Mil), 490 V/Mil at 25 deg C/77 deg C (60 Mil) After 24 hr in Water
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 50000 - 70000 CP at 25 deg C/77 deg F (ASTM D2196), 2000 - 4000 CP at 55 deg C/194 deg F (ASTM D2196)
  • Density: 1.2640 g/cm3 (77 deg F (25 deg C))
  • Thermal Conductivity: 0.2 - 0.3 W/mK (ASTM C518)
  • Tensile Strength: 400 psi at 25 deg C/77 deg F
  • Gel Time: 150 - 180 min
  • Viscosity: 50000 - 70000 cP
  • Viscosity - Part-A: 3000 - 11000 cP

Applications :

  • Potting and Sealing of Electrical and Electronic Equipment
  • Electromagnetic Devices
  • Low Voltage Transformers
  • Chokes
  • Toroids
  • Ballast Insulation
  • Power Supplies
  • Lifting Magnets