text.skipToContent text.skipToNavigation

Elantas PDG RanVar™ B2-203B Epoxy Filled Resin, 50 lb/5 gal, Opaque Red

ID: B2203BPAIL Mfr ID: B2203BPAIL
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG RanVar™ B2-203B Epoxy Filled Resin, Epoxy Base Type, Room Temperature Cure Type, >94 deg C (ASTM D93) Flash Point, Within 8 - 12 hr At 25 deg C/77 deg F Full Cure Time, 30 - 120 min At 25 deg C/77 deg F Gel Time, 100 (Parts By Weight And Volume) Resin, 25 (Parts By Weight) 26.7 (Parts By Volume) Hardener Mixing Ratio, 35000 - 60000 CP At 25 deg C/77 deg F Viscosity, 30000 - 50000 CP At 25 deg C/77 deg F Viscosity - Part-A, 40000 - 80000 CP At 25 deg C/77 deg F Viscosity - Part-B.

USD $32.04 / LB

Buy more and save

50-649 $32.04 / LB
650-1249 $26.98 / LB
1250+ $23.30 / LB

Check availability 

This item may be sold in units of 50.

  • Brand name :  Elantas Pdg
  • Trade Name :  RanVar™
  • Series :  RanVar™ B2-203B
  • Item Name :  Epoxy Filled Resin
  • Short Desc :  RESIN,EPOXY FILLED,B2-203B 50-LB/5GL PL
  • UNSPSC :  13111001

RanVar™ B2-203 is a filled, room temperature cured, two-component epoxy system.

Performance Details
Full Cure Time Within 8 - 12 hr at 25 deg C/77 deg F 
Gel Time 30  min
Design & Construction
Base Type Epoxy 
Color Opaque Red 
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Net Weight 12.15 - 12.55 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Viscosity 35000  cP
Mixing Ratio 100 (Parts By Weight and Volume) Resin, 25 (Parts By Weight) 26.7 (Parts By Volume) Hardener 
Viscosity - Part-A 30000  cP
Viscosity - Part-B 40000  cP
Physical Properties
Container Size 50  lb
Container Type Pail 

Elantas PDG RanVar™ B2-203B Epoxy Filled Resin, 50 lb/5 gal, Opaque Red Safety Data Sheet (SDS) 

Elantas PDG RanVar™ B2-203B Epoxy Filled Resin, 50 lb/5 gal, Opaque Red Brochure 

Features :

  • Room temperature or low heat cure
  • Chemical and moisture resistant
  • Mineral-filled for enhanced heat dissipation
  • Atmospheric potting / casting, Vacuum potting / casting application methods
  • Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • Secondary insulation
  • Container Size: 50 lb/5 gal
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 35000 - 60000 CP at 25 deg C/77 deg F
  • Viscosity - Part-B: 40000 - 80000 CP at 25 deg C/77 deg F
  • Gel Time: 30 - 120 min
  • Viscosity: 35000 - 60000 cP
  • Viscosity - Part-A: 30000 - 50000 cP
  • Viscosity - Part-B: 40000 - 80000 cP

Applications :

  • Filling and Potting of Stator Windings