Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit
MFR #:Dolphon® CR-1034H-B
EIS #:PH21-Dolphon CR-1034H-B
MFR #:Dolphon® CR-1034H-B
EIS #:PH21-Dolphon CR-1034H-B
Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit, Epoxy Base Type, Room Temperature Cure Type, 7.8 - 8.2 lb/gal At 77 °F (25 °C) Density, 390 V/Mil (1/8 Inch Specimen) Dielectric Strength, 80 Shore D Hardness, 5 (Part By Weight) Mixing Ratio, 7900 psi (ASTM D638-60T) Tensile Strength, 9 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 50 - 150 cps At 77 °F (25 °C) Viscosity. - CR-1034-H is a semi-rigid, two-part, room curing epoxy resin specifically formulated for encapsulation by buttering on electric motors.
$51.96
Select from the options below
Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit, Epoxy Base Type, Room Temperature Cure Type, 7.8 - 8.2 lb/gal At 77 °F (25 °C) Density, 390 V/Mil (1/8 Inch Specimen) Dielectric Strength, 80 Shore D Hardness, 5 (Part By Weight) Mixing Ratio, 7900 psi (ASTM D638-60T) Tensile Strength, 9 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 50 - 150 cps At 77 °F (25 °C) Viscosity. - CR-1034-H is a semi-rigid, two-part, room curing epoxy resin specifically formulated for encapsulation by buttering on electric motors.
Product Options
Showing 1 out of 1 options
 | Container Size: 45 g | EIS Part #: DOLCR1034HB2LB | $ / each |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameEpoxy Buttering Kit
Trade NameDolphon®
SeriesDolphon® CR-1034H-B
Design & Construction
Base TypeEpoxy
ColorRed
Cure TypeRoom Temperature
Performance Details
Tensile Strength7900 psi
Chemical Properties
Viscosity50 cP
Mixing Ratio5 (Part By Weight)
Electrical Properties
Dielectric Strength390 V/mil
Physical Properties
Hardness80 Shore D
Features
- Excellent adhesion for electrical and electronic applications
- Supplied in kit form for easy measuring of resin and reactor
- Optimum electrical properties
- Thixotropic consistency, no sagging
- Can be used for bonding and "glob" top applications
- Excellent abrasion, moisture and chemical resistance
- 0.4% (ASTM D-570-59aT) water absorption
- 5.0 x 10^12 ohms surface resistivity
- 6.5 x 10^13 ohm-cm volume resistivity
- Dielectric Strength: 390 V/Mil (1/8 Inch Specimen)
- Viscosity: 50 - 150 cps at 77 °F/25 °C
- Density: 7.8 - 8.2 lb/gal at 77 °F (25 °C)
- Thermal Conductivity: 9 x 10^-4 Cal/sec/cm^2/°C/cm
- Tensile Strength: 7900 psi (ASTM D638-60T)
- Viscosity: 50 - 150 cP
Applications
- Electric Motors
- Stators
- Coil Ends
- Marginal Ends of Transformers
- Armatures
- Steel/Glass/Ceramic