MFR #:4564
EIS #:PH22-4564
MFR #:4564
EIS #:PH22-4564
Intertape 4564 porous non-woven polyester backing with a zone coated acrylic adhesive. The tape is free from corrosive substances and withstands impregnating varnishes and lacquers. The porous area without adhesive allows the impregnating fluids to pass through, avoiding air entrapment. The impregnated and cured tape provides a high insulating barrier. - The breakdown voltage will increase after being impregnated with varnish or lacquer. The insulation class will increase to that of the impregnation varnishes or lacquers after the part is cured. It utilizes porous non-woven polyester backing with a zone coated acrylic adhesive. Good storage stability.
$19.81
Select from the options below
Intertape 4564 porous non-woven polyester backing with a zone coated acrylic adhesive. The tape is free from corrosive substances and withstands impregnating varnishes and lacquers. The porous area without adhesive allows the impregnating fluids to pass through, avoiding air entrapment. The impregnated and cured tape provides a high insulating barrier. - The breakdown voltage will increase after being impregnated with varnish or lacquer. The insulation class will increase to that of the impregnation varnishes or lacquers after the part is cured. It utilizes porous non-woven polyester backing with a zone coated acrylic adhesive. Good storage stability.
Product Options
Showing 2 out of 2 options
Width: 1 Inch | EIS Part #: 456400X1 | $ / Roll | ||
Width: 0.75 Inch | EIS Part #: 456400X.75 | $ / Roll |
- Attributes
- Applications
Attributes
General Information
Item NameElectrical Tape
Trade NameInter Tape
Series4564
Design & Construction
Adhesive TypeAcrylic
Backing MaterialPolyester Fleece
ColorNatural
Performance Details
Adhesive Strength32 oz/Inch
Tensile Strength17 lb/Inch
Electrical Properties
Dielectric Strength500 V
Physical Properties
Core Size3 Inch
Elongation35%
Length55 Yard
Thickness6.5 Mil
Width-
Environmental Condition
Temperature Rating130 °C
Applications
- For Coil Wrapping, Tabbing, Anchoring and Affixing Glass Fabrics During Injection Molding