text.skipToContent text.skipToNavigation

3M Super 20 Epoxy Printable Electrical Tape, 2" x 60 yd x 5 Mil, White

ID: 3M20SUPX2 Mfr ID: 20SUPX2
Manufactured by: 3M Electrical OEM Materials
3M epoxy film electrical tape Super 20 is a 5 Mil total thickness, high dielectric, flame retardant tape. The tape has an acrylic, pressure sensitive adhesive that has resistance to heat, oxidation, solvent and oils. The tape shall perform at a temperature of 311 deg F without loss of physical or electrical properties.

Width

USD $86.20 / RL

Buy more and save

1-11 $86.20 / RL
12-23 $77.75 / RL
24-47 $70.80 / RL
48+ $60.08 / RL

Check availability 

This item may be sold in units of 1.

  • Brand name :  3M
  • Series :  Super 20
  • Item Name :  Electrical Tape
  • Short Desc :  TAPE,3M 20 SUPER 2.000"X 60YD ROLL WHT
  • UNSPSC :  31201502

The tape is puncture resistant and has excellent electrical and handling properties. Tape Super 20 is tough, flexible, conformable and resistant to solder damage. The acrylic pressure sensitive adhesive offers solvent resistance without a thermosetting bake cycle.

Design & Construction
Color White 
Adhesive Type Acrylic 
Backing Material Epoxy Film 
Performance Details
Adhesive Strength 30  oz/Inch
Elongation 120% 
Tensile Strength 45  lb/Inch
Breaking Strength 45  lb/Inch
General Features
Shelf Life 60 Months 
Type Printable 
Storage Temperature 21 deg C 
Environmental Condition
Temperature Rating 155  deg C
Resists Heat, Oxidation, Solvent, Oil 
Flame Retardant Yes 
Electrical Properties
Dielectric Strength 8000  V
Physical Properties
Length 60  Yard
Core Size 3 Inch 
Width 2  Inch
Thickness 5  Mil

3M Super 20 Epoxy Printable Electrical Tape, 2" x 60 yd x 5 Mil, White Brochure 

3M Super 20 Epoxy Printable Electrical Tape, 2" x 60 yd x 5 Mil, White Specification Sheet 

Features :

  • Tape is tough, conformable and resistant to solder damage
  • Use as coil cover, anchor, harnessing, banding and as core, layer and crossover insulation
  • Thicker, double-sided epoxy for higher temperature and dielectric
  • The adhesive coating shall be smooth and uniform and be free of lumps and bare spots
  • There shall be no separator between adjacent layers of the roll
  • Temperature rating of 0 to 155 deg C

Applications :

  • For Wrapping Relays, Coils, Transformers, Bobbin-Wound Sub-Fractional Horsepower Shaded-Pole Motors and Stick-Wound Coils, also for Holding in Fractional Horsepower Motors, Arbor-Wound Coils and Wire Harnesses