text.skipToContent text.skipToNavigation

Gear Motors

  • 1(current)
  • 2
Displaying 1 - 21 of 39 products found
  • Leeson 230V 1-Phase Totally Enclosed Non-Ventilated (TENV) Enclosure Reconnect (Reversible) AC Gearmotor

    Multiple item options available
    Mfr ID: LE-115/230-TENV-ACG
    Leeson 230V 1-Phase Totally Enclosed Non-Ventilated Enclosure Reconnect (Reversible) AC Gearmotor. All rated for 60/50 Hz operation except hi-torque single-phase which are 60 Hz only, Run capacitor supplied at no additional cost for single phase designs, Three phase and hi-torque single phase models include conduit box, other single phase models do not, These gearmotors are designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail, Overhung load capacities shown are at center of output shaft

     

  • Leeson 460V 3-Phase Totally Enclosed Fan-Cooled (TEFC) Enclosure AC Gearmotor

    Multiple item options available
    Mfr ID: LE-230/460-TEFC-ACG
    Leeson 460V 3-Phase Totally Enclosed Fan-Cooled Enclosure AC Gearmotor. Rugged die cast aluminum gear housing for maximum gear and bearing support, Precision machined gearing, hardened for maximum load capability, All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock overload of 200%, Oversized output bearings for greater overhung load capacity and long life, High carbon alloy output shaft provides maximum strength and rigidity

     

  • Leeson Bravo™ Totally Enclosed Fan-Cooled (TEFC) Enclosure DC Gearmotor

    Multiple item options available
    Mfr ID: LE-M-B-TEFC-DCG
    Leeson Totally Enclosed Fan-Cooled Enclosure DC Gearmotor. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation, Single piece die cast aluminum alloy housing is vacuum impregnated with Resinol RT for protection and sealing, Light weight gearbox combines high tensile strength along with being precision machined for alignment of bearings and gearing, High temperature Nitrile seals for optimum seal life, Gearbox provided with solid output shaft, but can be converted to a hollow output shaft. Simply remove the solid shaft by removing the Snap rings

     

  • Leeson DC Totally Enclosed Non-Ventilated (TENV) Gearmotor

    Multiple item options available
    Mfr ID: M111502
    Precision machined in-line steel gears. First stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel.

     

  • Leeson 230V 1-Phase Totally Enclosed Fan-Cooled (TEFC) Enclosure Reconnect (Reversible) AC Gearmotor

    Multiple item options available
    Mfr ID: LE-115/230-TEFC-P1100-ACG
    Leeson 230V 1-Phase Totally Enclosed Fan-Cooled Enclosure Reconnect (Reversible) AC Gearmotor. Capacitor start designs rated for 115/230VAC 60 HZ input, Conduit box included as standard, Rugged die cast aluminum gear housing for maximum gear and bearing support, Precision machined gearing, hardened for maximum load capability, All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock overload of 200%

     

  • Leeson 842 Gearmotor, 1/15 HP Input, 19 rpm, 15/230VAC, 31 Frame, TEFC

    ID: MOTM1125128
    Mfr ID: LE-M-15/230-TEFC-G
    Leeson 842 Series PF Gearmotor, 10.42 Inch L x 5.3 Inch W x 3.97 Inch H, Continuous Duty, Totally Enclosed Fan-Cooled Enclosure, 31 Frame, 1/15 HP Input, 155 lb Over-Hung Load, 1-Phase, Reconnect Rotation, Service Factor: 1, 0.5 Inch Shaft Dia, Horizontal Shaft, 19 rpm, 15/230VAC

     

  • Leeson PZ AC Gearmotor, 1/15 HP Input, 57 rpm Output, 115V, PZ3-31 Frame, TEFC

    ID: MOTM1125130
    Mfr ID: LE-M-115-TEFC-ACG
    Leeson RE-PZ-M1125 Series PF AC Gearmotor, 9.62 Inch L x 5.3 Inch W x 3.97 Inch H, Continuous Duty, Totally Enclosed Fan-Cooled Enclosure, PZ3-31 Frame, 60 Hz, 0.9A Full Load, 56 lb-Inch Full Load, 30:1, 1/15 HP Input, 171 lb Over-Hung Load, 1-Phase, Service Factor: 1, 0.5 Inch Shaft Dia, Horizontal Shaft, 57 rpm Output, 40 deg C Ambient, 115V

     

  • Leeson 230V 3-Phase Totally Enclosed Fan-Cooled (TEFC) Enclosure Reconnect AC Gearmotor

    Multiple item options available
    Mfr ID: LE-M-190/230-TEFC-ACG
    Leeson 230V 3-Phase Totally Enclosed Fan-Cooled Enclosure Reconnect AC Gearmotor. Permanent split capacitor design rated for 115/230VAC 60/50 HZ input, Optional conduit box available

     

  • Leeson PZ AC Gearmotor, 1/7 HP, 150 rpm, 90VDC Armature, 30B Frame, TENV

    ID: MOTM1125005
    Mfr ID: LE-M-TENV-ACG
    Leeson RE-PZ-M1125 Series Parallel Shaft AC Gearmotor, 90VDC Armature, Ball Bearing, 8.46 Inch L x 3.97 Inch H, Totally Enclosed Non-Ventilated Enclosure, 30B Frame, 0.80A Full Load, 24 lb-Inch Full Load, 12:1, 1/7 HP, 180 lb Over-Hung Load, Reversible Rotation, Service Factor: 1, Horizontal Shaft, 150 rpm

     

  • Leeson Totally Enclosed Fan-Cooled (TEFC) Enclosure DC Gearmotor

    Multiple item options available
    Mfr ID: LE-TEFC-DCG
    Leeson Totally Enclosed Fan-Cooled Enclosure DC Gearmotor. Rugged die cast aluminum gear housing for maximum gear and bearing support, Precision machined gearing, hardened for maximum load capability, All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock overload of 200%, Oversized output bearings for greater overhung load capacity and long life, High carbon alloy output shaft provides maximum strength and rigidity

     

  • Leeson Totally Enclosed Non-Ventilated (TENV) Enclosure Reversible DC Gearmotor

    Multiple item options available
    Mfr ID: LE-TENV-DCG
    Leeson Totally Enclosed Non-Ventilated Enclosure Reversible DC Gearmotor. Rugged die cast aluminum gear housing for maximum gear and bearing support, Precision machined gearing, hardened for maximum load capability, All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock overload of 200%, Oversized output bearings for greater overhung load capacity and long life, High carbon alloy output shaft provides maximum strength and rigidity

     

  • Leeson 707005L02 Grove Gear Stock Ratio Multiplier, 2.91 HP Input, 2.82 HP Output, 438 rpm Output, 56C Frame

    ID: MOT707005L02
    Mfr ID: LE-W-GGSRM
    Leeson Washguard® Motorized Quill Input Grove Gear Stock Ratio Multiplier, 4.83 Inch W, 56C Frame, Cast Iron Gear, 4:1, 2.91 HP Input, 2.82 HP Output, 438 rpm Output, 419 lb-Inch Output

     

  • Leeson 31C Frame Totally Enclosed Non-Ventilated (TENV) AC Gearmotor

    Multiple item options available
    Mfr ID: M11
    Leeson AC gear motor with precision machined aluminum gear housing. Permanent split capacitor design rated for 115/230VAC 60/50 HZ input. Lubrication is permanent with an oil bath. Gearbox has all ball bearings. Output shaft is field interchangeable from left hand to right hand style by reassembly. Double output shaft available as a factory option. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow.

     

  • Leeson 38F Frame Totally Enclosed Fan-Cooled (TEFC) AC Gearmotor

    Multiple item options available
    Mfr ID: M114
    Leeson AC Gear Motor are worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow. Lubrication is permanent with an oil bath and precision machined aluminum gear housing.

     

  • Leeson M11 SCR Rated Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

    Multiple item options available
    Mfr ID: M11-SCR
    Precision machined aluminum gear housing. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Lubrication is permanent with an oil bath. Gearbox has all ball bearings. Output shaft is field interchangeable from left hand to right hand style by reassembly. Double output shaft available as a factory option. Performance matched for continuous duty service over 60:1 speed range. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow. Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4.

     

  • Leeson P240 AC Gear Motor

    Multiple item options available
    Mfr ID: P240
    Leeson AC gear motor with precision machined in-line steel gears. Permanent split capacitor design rated for 115/230VAC 60/50 HZ input. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. First stage steel helical gear followed by spur-type gears. Output shafts have needle bearings for high load capacities. Shafts are hardened steel.

     

  • Leeson 34 Frame Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

    Multiple item options available
    Mfr ID: PE350
    Leeson 34 frame continuous duty DC gear motor.

     

  • Leeson 31 Frame Totally Enclosed Fan-Cooled (TEFC) AC Gearmotor

    Multiple item options available
    Mfr ID: PZ-AC Gear Motor
    Precision machined in-line steel gears. Permanent split capacitor design rated for 115VAC 60 HZ input. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. First stage steel helical gear followed by spur-type gears. Output shafts have needle bearings for high load capacities. Shafts are hardened steel.

     

  • Leeson M1135 Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

    Multiple item options available
    Mfr ID: RE-M1135
    Leeson M1135 Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

     

  • Leeson PZ Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

    Multiple item options available
    Mfr ID: RE-PZ-M11
    Leeson PZ Totally Enclosed Non-Ventilated (TENV) DC Gearmotor

     

  • Leeson 230V 1-Phase Totally Enclosed Fan-Cooled (TEFC) Enclosure AC Gearmotor

    Multiple item options available
    Mfr ID: LE-115/230-TEFC-PE350-ACG
    Leeson 230V 1-Phase Totally Enclosed Fan-Cooled Enclosure AC Gearmotor. All rated for 60/50 Hz operation except hi-torque single-phase which are 60 Hz only, Run capacitor supplied at no additional cost for single phase designs, Three phase and hi-torque single phase models include conduit box, other single phase models do not, These gearmotors are designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail, Overhung load capacities shown are at center of output shaft

     

    • 1(current)
    • 2