text.skipToContent text.skipToNavigation

EIS Supplier

Shop All EIS Supplier Products
  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 383 products found
  • Parker 65-00 Therm-A-Form™ Cho-Therm® Thermally Conductive Silicone

    Multiple item options available
    Mfr ID: 65-00
    Therm-A-Form thermally conductive silicone elastomer products are dispensable forming place compounds designed for heat transfer without excessive compressive force in electronics cooling applications. Each compound is available in ready-to-use cartridge systems, eliminating weighing, mixing and degassing procedures.


  • Aremco 835 Ceramabond™ Ceramic Adhesive, 1 qt Bottle, White

    ID: ARE835Q
    Mfr ID: 835
    Aremco's high temperature ceramic adhesives are unique inorganic formulations for bonding and sealing ceramics, metals, quartz, graphites, textiles and composite materials used in design, process and maintenance applications to 3200 deg F.


  • Parker 50-01-0360-0020 Cho-Bond® Two-Part Conductive Adhesive, 1 pt Aluminum Can Kit, Light Gray

    ID: CHOBOND03600020
    Mfr ID: 50-01-0360-0020
    Cho-Bond 360-20 is a two-component, silver plated copper filled conductive epoxy adhesive designed for applications where a strong, conductive electrical bond must be achieved. The silver copper filler of Cho-Bond 360-20 provides a cost effective alternative to pure silver filled conductive epoxies in applications where moderate conductivity is acceptable.


  • Parker 61-15-0808-1671 Cho-Therm® High Power Thermal Insulator Pad, 8" L x 8" W x 0.38 mm T, White

    ID: CHOTHERM167103
    Mfr ID: 61-15-0808-1671
    Cho-Therm 61-15-0808-1671 high-power thermal insulator pads are thermally conductive materials designed for use where the highest possible thermal, dielectric and mechanical properties are required. Fiberglass cloth reinforcement strengthens Cho-Therm pads against tear, cut-through and punctures. These materials are available in sheet form and die-cut configurations.


  • Aegis EP2400 Conductive Epoxy, 0.5 oz Twin Syringe, Light Gray/Silver

    Mfr ID: EP2400
    Conductive silver epoxy provides excellent electrical conductivity. Cures at room temperature in 4 hr at or above 75 deg F. Install AEGIS Rings directly to the motor end bracket. For faster curing times, heat the bond to between 150 to 250 deg F for 10 min and allow to cool.


  • Hardman 4001 Epoxy Adhesive, 3.5g Pack, Clear/Amber, 100/Carton

    ID: HAR04001
    Mfr ID: 4001
    Hardman Fast-Setting epoxy is an extra fast setting, two-component, room temperature curing epoxy adhesive. The system will cure at as low as -18 deg C (0 deg F). It has a convenient mix ratio, excellent cohesive strength and bonds to most substrates including metal, wood, concrete, ceramics and many plastics.

    In Stock

  • Loctite 286 Eccobond™ Epoxy Adhesive, 6 oz Tube, White

    ID: EC286-6OZ-KIT
    Mfr ID: 286-6OZ
    Eccobond 286 is a two-component, room temperature curing, epoxy adhesive that is used for bonding plastics, metal, piping and other maintenance applications. It offers good thermal conductivity, minimum flow and easy use. Only contact pressure is required. Initial set up is about 4 hr and complete cure in 24 hr.


  • Loctite PSX-D Thermal Gel, 55cc Syringe, Gray

    ID: LOC1695226
    Mfr ID: 1695226
    Loctite PSX-D Thermal Gel.


  • Samco SILWRAP-A Tape, 1" x 12 yd

    Samco Silwrap self-fusing silicone tape is extruded from high performance silicone rubber. It is self adhering and self-fusing, curing into a solid rubber insulator at room temperature in 24 hours or less, resulting in an inseparable barrier that resists moisture, ozone and corona at temperatures up to 250 deg C.

    In Stock

  • 12 Fiber Tubing, 3/4" x 1" x 3' Random

    12 Fiber Tubing.


  • 7 Fiber Tubing, 7'

    7 Fiber Tubing.


  • 8 Fiber Tubing, 3' Random

    8 Fiber Tubing.


  • 132001-ASH Ashland® Stripper, 55 gal

    ID: 132001-ASH
    Mfr ID: 132001-ASH
    Ashland® Stripper, Liquid Form.

    In Stock

  • 69917-ASH Ashland® Thinner, 55 gal

    ID: 69917-ASH
    Mfr ID: 69917-ASH
    Ashland® Thinner, Liquid Form.


  • Ashland® Glycol Ether, 5 gal

    ID: EBC5G
    Mfr ID: EBC5G
    Ashland® Glycol Ether, Liquid Form.


  • EL-CAST 641 Electronic Resin With Hardeners, 2 lb, Black/White

    Mfr ID: ELCAST641X1LB
    EL-CAST 641 Electronic Resin With Hardeners, Black/White.


  • Grayline Black Standard Wall High Performance Tubing

    Multiple item options available
    Mfr ID: Grayline TUBEPVC105-Black
    Gray line 105 deg C is a flexible polyvinyl chloride tubing designed for a wide range of electrical tubing and electrical insulating applications. This flame resistant product features a wide operating temperature range, and outstanding physical and electrical insulating properties.

    In Stock

  • ID:
    Mfr ID: KRAFT501
    Kraft Paper Kraft Sheet, Sheet Configuration, Transformer oils readily absorb into kraft paper and thereby double the kraft paper's dielectric constant.


  • Kraft Paper Kraft Paper Sheet, 3 Mil x 24" x 36"

    ID: KRAFT301
    Mfr ID: KRAFT301
    Kraft Paper Kraft Paper, Transformer oils readily absorb into kraft paper and thereby double the kraft paper's dielectric constant.

    In Stock

  • Needle Felt, 50' x 2" x 1/8"

    ID: FELTP100X2
    Mfr ID: FELTP100X2
    Needle Felt.

    In Stock

  • DuPont Nomex® 410-ACT Square Form Wedge

    Multiple item options available
    Mfr ID: Nomex® 410-SQ-ACT-TU
    Nomex® Type 410 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® Type 410 is the original form of Nomex® paper and is widely used in a majority of electrical equipment applications. Nomex® Type 410 is used in almost every known electrical sheet insulation application.


    • 1(current)
    • 2
    • 3