Dow Corning 236 Dispersion Coating, 0.45kg Can, White

ID: DC236X.45KG Mfr ID: 236X.45KG
Manufactured by: Dow Corning
Dow Corning 236 dispersion coating is a silicone rubber coating. It is easily applied to a wide variety of surfaces to provide a dry-surfaced, durable, rubbery coating. Supplied as a liquid, the coating material can be applied by brushing, spraying, dipping, roller coating or stamp coating. It cures to form a smooth, white rubber coating at room temperature when exposed to the air.
Special Handling Required

Select by Part Number

Select Options Below
Container Type
Container Size

USD $32.59 / CAN

Check availability 

This item may be sold in units of 4.

  • Brand name :  Dow Corning
  • Series :  236
  • Item Name :  Dispersion Coating
  • Short Desc :  DISPERSION,236 CAN .45KG CAN
  • Packaging :  4/Carton
  • UNSPSC :  31201700

Dow Corning 236 dispersion coating is designed for use as a release coating to provide easy clean-up and to provide protection of surfaces from weathering and corrosion. It can be used as a lining to protect plastic containers or vessels and to shield plastic materials from weathering or sticky materials. The cured coating is an electrical insulator.

Performance Details
Full Cure Time 24 hr 
Elongation 5% 
Tensile Strength 325 psi 
Design & Construction
Form Liquid 
Color White 
Cure Type Room Temperature 
Environmental Condition
Temperature Rating -40 to 150 deg C 
Chemical Properties
Composition Silicone 
Specific Gravity 1.64 
Viscosity 675 cP 
Physical Properties
Container Size 0.45kg 
Container Type Can 
Hardness 20 Shore A 

Dow Corning 236 Dispersion Coating, 0.45kg Can, White Safety Data Sheet (SDS)


Dow Corning 236 Dispersion Coating, 0.45kg Can, White Technical Data Sheet 

Dow Corning 236 Dispersion Coating, 0.45kg Can, White Brochure 

Features :

  • Supplied as low viscosity, cures to tough rubber coating
  • Oxime cure at room temperature by reaction with moisture vapor in the air
  • Good release - can release sticky materials (except silicones), can prevent process materials from sticking to rolls and conveyors
  • Can reduce equipment clean-up caused by build-up of sticky materials
  • Can be applied on the job does not require disassembling equipment to apply or repair the coating
  • Excellent release
  • Weather resistant
  • Excellent electrical insulator

Applications :

  • For Easing Clean-Up of Latex Manufacturing Equipment and Paint-Spraying Operations and Removal of Flash in Urethane and Polyester Molding, Preventing Adhesion and Build-Up on Conveyor Belts, Paper and Fabric Rolls, Reducing Build-Up on Waste-Handling Equipment