MFR #:M11-SCR
EIS #:PH23-M11-SCR
Series #:M11-SCR
MFR #:M11-SCR
EIS #:PH23-M11-SCR
Series #:M11-SCR
Precision machined aluminum gear housing. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Lubrication is permanent with an oil bath. Gearbox has all ball bearings. Output shaft is field interchangeable from left hand to right hand style by reassembly. Double output shaft available as a factory option. Performance matched for continuous duty service over 60:1 speed range. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow. Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4. - Leeson SCR Rated DC Gear Motor, Armature Voltage: 90V, Bearing Type: Ball, Dimensions: 8.79 Inch L x 3.73 Inch H, Duty: Continuous, Enclosure Type: Totally Enclosed Non-Ventilated, Frame Size: 25, Gearing Arrangement: Worm Gear, HP Rating: 0.058 HP, Insulation Type: Class H3, Material: Steel, Over-Hung Load: 185 lb, Overload Protector: No, Rotation: Reconnect, Service Factor: 1, Shaft Diameter: 0.5 Inch, Shaft Length: 1.3 Inch, Shaft Position: Right-Angle, Temperature Rating: 40 °C.
$846.20
- $895.14
Select from the options below
Precision machined aluminum gear housing. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Lubrication is permanent with an oil bath. Gearbox has all ball bearings. Output shaft is field interchangeable from left hand to right hand style by reassembly. Double output shaft available as a factory option. Performance matched for continuous duty service over 60:1 speed range. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow. Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4. - Leeson SCR Rated DC Gear Motor, Armature Voltage: 90V, Bearing Type: Ball, Dimensions: 8.79 Inch L x 3.73 Inch H, Duty: Continuous, Enclosure Type: Totally Enclosed Non-Ventilated, Frame Size: 25, Gearing Arrangement: Worm Gear, HP Rating: 0.058 HP, Insulation Type: Class H3, Material: Steel, Over-Hung Load: 185 lb, Overload Protector: No, Rotation: Reconnect, Service Factor: 1, Shaft Diameter: 0.5 Inch, Shaft Length: 1.3 Inch, Shaft Position: Right-Angle, Temperature Rating: 40 °C.
Product Options
Showing 1 out of 1 options
Speed Rating: 250 rpm | EIS Part #: MOTM1115021 | $ / each |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameDC Gear Motor
SeriesM11-SCR
General Features
StandardsUL Listed, CSA Approved, CE Certified
TypeSCR Rated
Design & Construction
DutyContinuous
Enclosure TypeTotally Enclosed Non-Ventilated
MaterialSteel
RotationReconnect
Bearing TypeBall
Insulation TypeClass H3
Gear MaterialAluminum
Gearing ArrangementWorm Gear
Shaft PositionRight-Angle
Performance Details
Over-Hung Load185 lb
Overload ProtectorNo
Electrical Properties
Armature Voltage90 V
HP Rating0.058 HP
Service Factor1
Physical Properties
Dimensions8.79 Inch L x 3.73 Inch H
Frame Size25
Shaft Diameter0.5 Inch
Shaft Length1.3 Inch
Environmental Condition
Temperature Rating40 °C
Features
- HP rating: 1/17 HP at 60 Hz
- Service factor: 1 at 60 Hz
Applications
- For Mounting at any Angle, But Motor Below the Reducer Should be Avoided to Prevent Leakage of Lubricant into the Motor Should the Motor Shaft Seal Fail