text.skipToContent text.skipToNavigation

Desco 19246 Dual Operator LED Continuous Monitor, 5.13" W x 1.11" L x 2.85" H

ID: 19246-DES Mfr ID: 19246
Manufactured by: Desco
The Dual Operator Workstation Continuous Monitor is a real time instrument that ensures that critical ESD control components in a sensitive area are effectively grounded. The instant an operators wrist strap or cord fails, the monitor will issue audible and visual alarms alerting the user of the problem.

USD $345.47 / PC

Check availability 

This item may be sold in units of 1.

  • Brand name :  Desco
  • Item Name :  Continuous Monitor
  • Short Desc :  MONITOR,DUAL OPERATR,SPLIT REMOTE
  • Packaging :  Each
  • UNSPSC :  46182100

In the same manner, the unit also confirms that a path to ground of less than 10 Megaohm (1 x 10^7 ohm) exists from the ESD protective worksurface. It independently monitors the operator and the worksurface.

General Features
Standards ANSI/ESD S20.20 
Design Features
Mounting Screw-On 
Electrical Properties
Frequency Rating 50/60 Hz 
Range 500k - 10 Megaohm 
Supporting Information
Power Supply 120VAC Adaptor 
Includes (1) Monitor Control Unit, 2 - 7 ft Remote Cables for Connection to Satellites, 120/220VAC Transformer, 2 - 6' Work Surface Ground Cord with Additional Ring Terminals, 2 - 6 ft Ground Cord, (4) Push and Clinch Snap (09863), (4) Counter Sink Washers, NIST Calibration Certificate 
Technical Details
Temperature Rating 0 to 40 deg C 
Display Type LED 
Physical Properties
Length 1.11  Inch
Width 5.13  Inch
Height 2.85  Inch

Desco 19246 Dual Operator LED Continuous Monitor, 5.13" W x 1.11" L x 2.85" H Technical Data Sheet 

Features :

  • Continuously monitors the integrity of both operators and ESD workstations, eliminating the need for periodic testing and recording
  • Banana jack creates a more consistent connection and helps to prevent accidental disconnects with operator's wrist strap
  • True continuous monitoring (versus pulsed or intermittent) of wrist strap functionality and operator safety according to accepted industry standard
  • Park snap feature for each operator on satellite remote
  • Full time status LEDs and audible alarm for operator and workstation monitoring
  • Miniscule electrical current required to generate waveform monitoring signal
  • Easy to install housing with screws or adhesive backed hook and loop strips

Applications :

  • For Adjacent Workstations for Assembly, Test, Packaging or other Applications