text.skipToContent text.skipToNavigation

Desco 19218 Jewel® LED Continuous Mini-Monitor, 2-5/64" W x 2.77" L x 23/32" H

ID: 19218-DES Mfr ID: 19218
Manufactured by: Devcon
The Jewel Workstation Continuous Mini Monitor independently monitors the operator and the worksurface. The instant an operator's wrist strap or cord fails, the monitor will issue audible and visual alarms alerting the user of the problem.

This Item is Flagged for Deletion. To find out more about this item, please contact your local sales office or search for other options. This Item is Flagged for Deletion. You may view Suggested Replacements for this item, contact your local sales office or search for other options.
  • Brand name :  Desco
  • Trade Name :  Jewel®
  • Item Name :  Continuous Mini-Monitor
  • Short Desc :  MONITOR,CONTINUOUS MINI JEWEL 120VAC
  • Packaging :  Each
  • UNSPSC :  41113700

In the same manner, the unit also confirms that a path to ground of less than 500 Megaohm exists from the ESD worksurface.

General Features
Standards ANSI/ESD S20.20, ISO 9000 
Electrical Properties
Frequency Rating 50/60 Hz 
Range 500k - 10 Megaohm 
Supporting Information
Power Supply 120VAC Adaptor 
Includes Push and Clinch Snaps, NIST Calibration Certificate 
Technical Details
Temperature Rating 32 to 100 deg F 
Display Type LED 
Physical Properties
Length 2.77  Inch
Width 2.07  Inch
Height 0.71  Inch

Desco 19218 Jewel® LED Continuous Mini-Monitor, 2-5/64" W x 2.77" L x 23/32" H Technical Data Sheet 

Features :

  • Single station continuous monitor for operator and ESD work surface
  • Banana jack creates a more consistent connection and helps to prevent accidental disconnects with operator's wrist strap
  • True continuous monitoring (versus pulsed or intermittent) of wrist strap functionality and operator safety according to accepted industry standard
  • Park snap feature provides means for operator to disconnect wrist strap cord when normally leaving the workstation without audible (false) alarm sounding
  • Full time status LEDs and audible alarm for operator and workstation monitoring
  • Miniscule electrical current required to generate waveform monitoring signal
  • Worksurface limit set to 500 Mohm

Applications :

  • For Individual Workstations for Assembly, Test, Packaging