text.skipToContent text.skipToNavigation

Loctite PC12-007MB Hysol® Conformal Coating, Dark Amber

ID: LOCPC12-007MB Mfr ID: PC12-007MB
Manufactured by: Loctite Electronics
Hysol PC12-007M is a 100% solids, general purpose, epoxy printed circuit coating developed to meet military requirements. Its long successful history has proved it to be an outstanding coating with maximum electrical and ruggedization properties. The coating is suitable for continuous operation up to 275 deg F and may be used on any substrate offering good adhesion. It is suggested that stress-sensitive components, such as diodes, be sleeved prior to coating.

Select by Part Number

Select Options Below
This Item is Flagged for Deletion. To find out more about this item, please contact your local sales office or search for other options. This Item is Flagged for Deletion. You may view Suggested Replacements for this item, contact your local sales office or search for other options.
  • Brand name :  Loctite
  • Trade Name :  Hysol®
  • Series :  LOC-12-007
  • Item Name :  Conformal Coating
  • UNSPSC :  31201710

PC12-007M meets the requirements of NASA specifications MSFC-SPEC-222 (Type I). It is widely used in commercial printed circuit applications and may be applied by spray, dip or brush procedures. A special solvent is available to control film build-up for thin coating.

Performance Details
Full Cure Time 2 hr 
Application Time 30 - 45 min 
Evaporation Rate <1 
Design & Construction
Form - Part-B Liquid 
Color - Part-B Dark Amber 
Cure Type Heat Cure 
Environmental Condition
Temperature Rating 125 deg C 
Electrical Properties
Dielectric Strength 1500V/Mil 
Chemical Properties
Composition Epoxy 
Specific Gravity - Part-B 0.9 
VOC - Part-B <10g/L 
Viscosity 15000 - 35000 cP 
Physical Properties
Odor/Scent - Part-B Ammoniacal 

Loctite PC12-007MB Hysol® Conformal Coating, Dark Amber Safety Data Sheet (SDS) 

Features :

  • Flexibility no cracking over 1/8 Inch diameter mandrel
  • Ruggedization no cracking or crazing with vibration
  • Film thickness adjustable from 0.0015 - 0.006 Inch
  • Fungus resistance non-nutrient per ASTM G21
  • Fluorescent when viewed under ultraviolet light (black light)

Applications :

  • For General Purpose, Commercial Printed Circuits