Dow 3-1953 Hydrocarbon Odor One-Part Conformal Coating, 3.6kg Pail, Straw
MFR #:4007531
EIS #:DC3-1953X3.6KG
Series #:3-1953
MFR #:4007531
EIS #:DC3-1953X3.6KG
Series #:3-1953
Out of Stock
Min Qty:1
|Qty Increment:1
Pack:32/Carton
more info
Solventless RTV elastomeric conformal coatings with hydrocarbon odor require atmospheric moisture to cure, needing no expensive ovens and various viscosity versions facilitate different application methods. These elastomers, when cured, offer the optimum stress relief for even the most delicate components and interconnections in a variety of service environments. - This family of coatings is rapidly gaining popularity due to its solventless formulations with Hydrocarbon Odor, its rapid cure rates that can be dramatically accelerated by mild heat and its cost effectiveness.
$106.74 / US pound
Pack: 32/Carton
Min Qty:1
|Qty Increment:1
Pack:32/Carton
more info
Solventless RTV elastomeric conformal coatings with hydrocarbon odor require atmospheric moisture to cure, needing no expensive ovens and various viscosity versions facilitate different application methods. These elastomers, when cured, offer the optimum stress relief for even the most delicate components and interconnections in a variety of service environments. - This family of coatings is rapidly gaining popularity due to its solventless formulations with Hydrocarbon Odor, its rapid cure rates that can be dramatically accelerated by mild heat and its cost effectiveness.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameConformal Coating
Series3-1953
General Features
Shelf Life360 Days
TypeOne-Part
Design & Construction
ColorStraw
Cure TypeRTV/Heat Cure
FormLiquid
Performance Details
Tensile Strength80 psi
Application Time8 min
Chemical Properties
CompositionPolydimethyl Siloxane
Specific Gravity0.98
Viscosity350 cP
Electrical Properties
Dielectric Strength425V/Mil
UL RatingUL746 E, UL94 V-0
Physical Properties
Container Size3.6kg
Container TypePail
Elongation60%
Hardness34 Shore A
Odor/ScentHydrocarbon
Environmental Condition
Temperature Rating-45 to 200 °C
Features
- Solventless elastomeric formulation
- Mild heat acceleration can speed in-line processing
- Good adhesion to many substrates
- Soft coating
- UV indicator
- No ovens required
- Allows use with many low-solids no-lead solder
- Improves reliability against stress
- Easy inspection under UV light
- Use in applications requiring multiple reliability industry standards
- Application methods are spray, brush, flow, automated pattern coating, may be dip coated with special precautions
- Hydrocarbon odor
Applications
- For Rigid and Flexible Circuit Boards