MFR #:88069549
EIS #:CHICO X7
MFR #:88069549
EIS #:CHICO X7
Out of Stock
Min Qty:1
|Qty Increment:1
more info
Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting. - A mineral wool that packs easily, forming around each conductor. Once hardened, the compound restricts the passage of gases, vapors, or flames through the conduit from one portion of an electrical installation to another portion.
Requires Quote / each
Min Qty:1
|Qty Increment:1
more info
Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting. - A mineral wool that packs easily, forming around each conductor. Once hardened, the compound restricts the passage of gases, vapors, or flames through the conduit from one portion of an electrical installation to another portion.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameCeramic Fiber
Trade NameChico® SpeedSeal™
SeriesSpeedSeal™ Chico® X-FBR
Physical Properties
Container Size1 lb
Hardness20 min
Features
- A mineral wool that packs easily, forming around each conductor
- Installs a reliable seal in five minutes - every time
- Hardens to a dense, strong mass that is suitable for class I, division 1, groups C, D and class II, division 1, groups E, F, G hazardous applications
- UL and cUL listed for use with 1/2 Inch to 2 Inch Eaton's Crouse-Hinds sealing fittings only
- Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the need for measuring before mixing
- Packaged with a screw-on nozzle for accurate dispensing
- Expands four times its original size in the sealing fitting, eliminating the need to separate the individual conductors with Chico X fiber
- Chico X fiber dams are not required in horizontal applications, reducing installation times
- Completely hardens in 20 minutes, simplifying use for OEMs
- Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings
Applications
- For Sealing Fittings and Hubs, Forms a dam between the integral bushing of the sealing fitting and the end of the conduit and around the electrical conductors entering the hub