MFR #:237AA
EIS #:PH18-237AA
MFR #:237AA
EIS #:PH18-237AA
3M Trizact cloth belt 237AA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X-weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish. - Self-sharpening pyramids start sharp, stay sharp and run cooler than conventional abrasives. Flexible backing for consistent finish over contours. For intermediate finishing and fine polishing prior to plating or buffing.
Select from the options below
3M Trizact cloth belt 237AA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X-weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish. - Self-sharpening pyramids start sharp, stay sharp and run cooler than conventional abrasives. Flexible backing for consistent finish over contours. For intermediate finishing and fine polishing prior to plating or buffing.
Product Options
Showing 4 out of 4 options
Length: 60 Inch | Width: 25 Inch | Grit: A16 | EIS Part #: 3MABB25XA16B | $ / Piece Pack: 5/Case | ||
Length: 30 Inch | Width: 1 Inch | Grit: A30 | EIS Part #: 3MABB1XA30 | $ / Piece Pack: 50/Pack, 200/Case | ||
Length: 130 Inch | Width: 1 Inch | Grit: A100 | EIS Part #: 3MABB1XA100-130 | $ / Piece Pack: 50/Case | ||
Length: 132 Inch | Width: 1 Inch | Grit: A100 | EIS Part #: 3MABB1XA100 | $ / each Pack: 200/Case |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameSanding Belt
Trade NameTrizact™
Series237AA
Design & Construction
Backing MaterialCloth
ColorGray
Abrasive MaterialAluminum Oxide
Application MaterialsTitanium, Cobalt and Nickel Alloy, Bronze, Zinc, Aluminum, Stainless Steel, Brass
Backing WeightX
Bond TypeResin
Supporting Information
Use WithRobotics, Benchtop, Stroke Sanders, Roll Grinders, Platen Sanders, Backstand, Centerless Grinders, Flat Finishers
Features
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
- Produces finer finishes than conventional electrostatically coated abrasives
- Excellent finish consistency, especially on stainless steel
- Structured patterned abrasive
Applications
- For Stroke Sanding, Finishing, Refining, Centerless and Cylindrical Grinding, Flat Finishing, Blending