EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign Up

Home
Home
Sign In / RegisterMy Account Overlay
0
0

Weidmann Electrical High-Density Pressboard, 83" x 42" x 0.188"

The image shown is representative of the product family and may not specifically be the individual item.  Laminated Board is manufactured according to the IEC standard 60763-3-1, Types LB3.1.1 and 3.1.2 at the Rapperswil plant in Switzerland. The resin…

EIS #:PBRDTIV.18881

Series #:PBRDT-HGH DN

EIS #:PBRDTIV.18881

Series #:PBRDT-HGH DN

Out of Stock

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
more info
This material ships LTL (Less than Truck Load)
more info
0
0
Laminated Board is manufactured according to the IEC standard 60763-3-1, Types LB3.1.1 and 3.1.2 at the Rapperswil plant in Switzerland. The resins used are casein and polyester. Casein is an aqueous and polyester resin a non-aqueous glue. We strongly recommend polyester resin glue for thicknesses >30.0 mm. When using casein glue for a thickness >30.0 mm, cracks can appear due to the increased water content. - The density of laminated Transformer board TIV is a maximum of 1.30 g/cubic cm. The moisture content of Laminated board with casein glue averages 8%, Laminated board with polyester resin glue is controlled at 2% to 6%, depending on the requirements. Laminated board can be classified as a high-density material.
$9.82 / US pound

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
more info
This material ships LTL (Less than Truck Load)
more info
0
0
Laminated Board is manufactured according to the IEC standard 60763-3-1, Types LB3.1.1 and 3.1.2 at the Rapperswil plant in Switzerland. The resins used are casein and polyester. Casein is an aqueous and polyester resin a non-aqueous glue. We strongly recommend polyester resin glue for thicknesses >30.0 mm. When using casein glue for a thickness >30.0 mm, cracks can appear due to the increased water content. - The density of laminated Transformer board TIV is a maximum of 1.30 g/cubic cm. The moisture content of Laminated board with casein glue averages 8%, Laminated board with polyester resin glue is controlled at 2% to 6%, depending on the requirements. Laminated board can be classified as a high-density material.

Attributes

General Information
Item NamePressboard
SeriesPBRDT-HGH DN
General Features
TypeHigh-Density
Design & Construction
ColorNatural
MaterialT-IV
Performance Details
Tensile Strength14000 psi
Compression Strength45000 psi
Physical Properties
Length83 Inch
Thickness0.188 Inch
Width42 Inch