EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign Up

Home
Home
Sign In / RegisterMy Account Overlay
0
0

Loctite 638 Maximum Strength Retaining Compound

The image shown is representative of the product family and may not specifically be the individual item.

MFR #:LOC-638

EIS #:PH11-LOC-638

Series #:LOC-638

MFR #:LOC-638

EIS #:PH11-LOC-638

Series #:LOC-638

0
0
Loctite 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm and where maximum strength at room temperature is required. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include locking bushings and sleeves into housings and on shafts. - Loctite 638 maximum strength retaining compound is recommended for slip fit parts with larger gaps. Excellent performance for dynamic, axial and radial loads. Bonds through contaminants including oils, cutting and corrosion protection fluids. Cures on metals without an activator.
$26.01
 - $227.44
Select from the options below
0
0
Loctite 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm and where maximum strength at room temperature is required. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include locking bushings and sleeves into housings and on shafts. - Loctite 638 maximum strength retaining compound is recommended for slip fit parts with larger gaps. Excellent performance for dynamic, axial and radial loads. Bonds through contaminants including oils, cutting and corrosion protection fluids. Cures on metals without an activator.

Product Options

Showing 2 out of 2 options
The image shown is representative of the product family and may not specifically be the individual item.
Container Size
50mL
EIS Part #
LOC1835936
$ / Bottle
Pack10/Case
The image shown is representative of the product family and may not specifically be the individual item.
Container Size
250mL
EIS Part #
LOC1835925
$ / Piece
Pack10/Case

Attributes

General Information
Item NameRetaining Compound
SeriesLOC-638
General Features
StandardsNSF P1 Approved, CFIA Listed
Storage Temperature8 to 21 °C
TypeMaximum Strength
Design & Construction
ColorGreen
Cure TypeAnaerobic Cure
FormLiquid
Performance Details
Shear Strength4500 psi
Application Time5 min
Full Cure Time24 hr
Chemical Properties
CompositionUrethane Methacrylate
Specific Gravity1.09
Viscosity2500 cP
VOC<3%
Physical Properties
Container TypeBottle
Odor/ScentCharacteristic
Supporting Information
Applicable MaterialsMild Steel, Stainless Steel and Plated Surfaces