text.skipToContent text.skipToNavigation

Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, 8 lb/1 gal

ID: EPO2388LB Mfr ID: EPO2388LB
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, Epoxy Base Type, Room Temperature Cure Type, 1.1846 g/cm3 (77 deg F (25 deg C)) Density, >94 deg C (ASTM D93) Flash Point, 4 hr At 93 deg C/200 deg F Gel Time, 100 (Parts By Weight) Mixing Ratio, 25000 - 45000 CP At 25 deg C/77 deg F 20 rpm Viscosity - Part-A, 5 - 20 CP At 25 deg C/77 deg F (20 rpm) Viscosity - Part-B.

USD $384.25 / KT

Buy more and save

1-12 $384.25 / KT
13-24 $323.58 / KT
25+ $279.46 / KT

Check availability 

This item may be sold in units of 1.

  • Brand name :  Elantas PDG
  • Trade Name :  Elan-Tron®
  • Series :  Elan-Tron® E238
  • Item Name :  Anode Bridge Laminating Epoxy Resin
  • Short Desc :  RESIN,ANODE BRIDGE LAMIN,E 238,8-LB/1-GL
  • UNSPSC :  13111001

ELAN-Tron® E 238 resin/C 238 hardener is a 100%-solids, two-component epoxy system.

Performance Details
Gel Time 4  hr
Design & Construction
Base Type Epoxy 
Form Liquid 
Cure Type Room Temperature 
General Features
Shelf Life 12 Months 
Type Two-Component 
Net Weight 9.7 - 10.1 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Mixing Ratio 100 (Parts By Weight) 
Viscosity - Part-A 25000  cP
Viscosity - Part-B 5  cP
Physical Properties
Container Size 8  lb

Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, 8 lb/1 gal Brochure 

Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, 8 lb/1 gal Safety Data Sheet (SDS) 

Features :

  • Room temperature or low heat cure
  • Thixotropic for minimal run-off
  • Semi-rigid
  • Excellent resistance to chemicals and moisture
  • Suitable for continuous service up to 121 deg C / 250 deg F
  • Brush, roller coat application methods
  • Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 60 min at 100g - 25 deg C / 77 deg F pot life
  • 2700 PSI at 25 deg C / 77 deg F lap shear strength (aluminum - aluminum)
  • 700 PSI at 25 deg C / 77 deg F lap shear strength (aluminum - rigid vinyl)
  • Container Size: 8 lb/1 gal
  • Flash Point: >94 deg C (ASTM D93)
  • Density: 1.1846 g/cm3 (77 deg F (25 deg C))
  • Viscosity - Part-B: 5 - 20 CP at 25 deg C/77 deg F (20 rpm)
  • Viscosity - Part-A: 25000 - 45000 cP
  • Viscosity - Part-B: 5 - 20 cP

Applications :

  • Protective Coating, Sealant and Adhesive for Metals and Plastics, Bonding Material for In-Place Laminates, Coating for Anode Bridges, Bus Bars, Etc,