MFR #:LE-Four-Quadrant-Full-Wave
EIS #:PH23-LE-Four-Quadrant-Full-Wave
Series #:LE-Four-Quadrant-Full-Wave
MFR #:LE-Four-Quadrant-Full-Wave
EIS #:PH23-LE-Four-Quadrant-Full-Wave
Series #:LE-Four-Quadrant-Full-Wave
DC controls are general purpose drives designed for use with permanent magnet type direct current motors. NEMA 1 enclosed drives are suitable for most industrial applications, with the NEMA 4X enclosures best suited for wash down or outdoor installations or for extremely dusty applications. Chassis only units are available for building into equipment, machinery or existing enclosures. - Most controls have dual voltage switch allowing the control to be used on 115 or 230V, single phase, 50/60 Hz service. However, the proper voltage motor should be selected for use with the power supply input, i.e., 90VDC motors for 115V input or 180V motors for 230V input service. Installation and adjustment instructions are included.
$1,127.78
- $2,062.60
Select from the options below
DC controls are general purpose drives designed for use with permanent magnet type direct current motors. NEMA 1 enclosed drives are suitable for most industrial applications, with the NEMA 4X enclosures best suited for wash down or outdoor installations or for extremely dusty applications. Chassis only units are available for building into equipment, machinery or existing enclosures. - Most controls have dual voltage switch allowing the control to be used on 115 or 230V, single phase, 50/60 Hz service. However, the proper voltage motor should be selected for use with the power supply input, i.e., 90VDC motors for 115V input or 180V motors for 230V input service. Installation and adjustment instructions are included.
Product Options
Showing 2 out of 2 options
Enclosure Type: Open | EIS Part #: MOT175721 | $ / each | ||
Enclosure Type: NEMA 4X | EIS Part #: MOT175720 | $ / each |
- Attributes
- Features
Attributes
General Information
Item NameAdjustable Speed DC Controller
Trade NameSpeedmaster™
SeriesLE-Four-Quadrant-Full-Wave
General Features
TypeFour Quadrant, Full Wave, SCR Voltage, Regenerative, Thyristor
Design & Construction
RotationReversible
Electrical Properties
Phase1-Phase
Voltage Rating115 V
HP Rating0.25 HP
IR CompensationAdjustable
Output Current10 A
Features
- General purpose for permanent magnet or shunt wound DC motors
- NEMA 4X and 4/12 suitable for wash down applications
- Dual voltage capable on most designs
- 115/230 V 1-phase input voltage - DC 90V or 180V output
- Adjustable minimum and maximum speed
- Speed pot included on chassis controls
- Adjustable IR compensation
- Heat sinks required as noted
- Four quadrant controls for precise motion control
- NEMA 4X or chassis style
- Motoring and braking torque regulation 1/4 hp through 2 HP
- HP Rating: 1/4 - 1 HP at 115VAC, 1/2 - 2 HP at 230VAC