text.skipToContent text.skipToNavigation

Manual Dispensing Guns

Single and Dual cartridge manual applicators for meter-mix dispensing. Convenient and cost-effective method to apply mix ratio products with almost no waste.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 46 products found
  • 3M 310M Manual Applicator, 310mL, 1/Case

    ID: 3MA310M
    Mfr ID: 62989099304
    3M manual applicator 310M is a high quality, manual driven applicator designed to dispense adhesive sealants in cartridges.

     

  • 3M 62977300128 Scotch-Weld™ Valve Assembly, For Polyurethane Reactive Adhesive Applicator

    ID: 3M62977300128
    Mfr ID: 62977300128
    3M 62977300128 Scotch-Weld™ Valve Assembly.

     

  • 3M 62989500236 Scotch-Weld™ Heat Tube Kit, For Polyurethane Reactive Adhesive Applicator

    ID: 3M62989500236
    Mfr ID: 62989500236
    3M Scotch-Weld PUR adhesive applicator heat tube kits are designed to help maintain and add functionality to your 3M Scotch-Weld PUR system. Choose from a variety of applicator tips, nozzle assemblies and air valve kits to find the right accessories for your stringent project requirements.

     

  • 3M 9234 Scotch-Weld™ Valve Assembly Kit, For TC/EC/LT Series Hot Melt Applicator

    ID: 3MA9234
    Mfr ID: 62923499305
    3M hot melt applicator TC/EC/LT valve assembly kit 9234 features a nozzle and valve designed to increase productivity by providing a precise and controlled flow of hot melt adhesive. The interior of the nozzle is threaded for easy application onto the valve. The construction is durable and can withstand high temperature hot melts.

     

  • 3M 62913699302 EPX™ Manual Applicator, 200mL, Silver, 1/Case

    ID: 3MAEPXGUN200ML
    Mfr ID: 62913699302
    3M Scotch-Weld EPX manual applicators are used to dispense two-component 3M Scotch-Weld structural adhesives packaged in Duo-Pak (DP) cartridges. There are a variety of applicators available to match the needs of your manufacturing process.

     

  • 3M 62974499303 EPX™ Plunger Assembly, 50mL, 10/Case

    ID: 3MAEPXPLUNGERX
    Mfr ID: 62974499303
    3M Scotch-Weld EPX 2:1 plunger assembly is for the EPX plus applicator.

     

  • 3M 62928199504 Scotch-Weld™ Low Temperature Hot Melt Applicator, 13.8 oz, 1/Case

    ID: 3MAPOLYGUNLTQ
    Mfr ID: 62928199504
    3M hot melt applicator LT quadrack as a comfortable, easy-to-control applicator that dispenses up to 2.6 lb of liquefied adhesive per hour to meet the demands of high-production environments, whenever and wherever two surfaces require a strong, clean bond. Because we believe if you have to do hot glue, you might as well do it quickly and comfortably.

     

  • 3M Scotch-Weld™ Low Temperature Hot Melt Applicator, 4.3 lb, 1/Case

    ID: 3MAPOLYGUNIILT
    Mfr ID: 62978396307
    3M hot melt applicator PG II LT with cartridge feed is our answer to your need for a low temperature, high volume hot melt adhesive applicator. Up to 3 cartridges can be fed through the rear loading port.

     

  • 3M 89476 Scotch-Weld™ End Cap, For Polyurethane Reactive Adhesive Applicator

    ID: 3M62989500038
    Mfr ID: 62989500038
    3M 89476 Scotch-Weld™ End Cap.

     

  • 3M 9277 Scotch-Weld™ Foot Pedal Assembly, For 3M™ Hot Melt Applicators

    ID: 3MA9277
    Mfr ID: 62927799304
    Choose the 3M hot melt applicator foot pedal assembly 9277 for high capacity, hands-free operation of our 3M hot melt applicators PG II and PG II LT.

     

  • 3M 9785 Scotch-Weld™ Extension Tip, 0.07" Orifice, For 3M™ Hot Melt Applicators

    ID: 3MA9785
    Mfr ID: 62978599306
    3M hot melt applicator extension tip 9785 is a tapered aluminum extension tip designed to provide a precise and controlled flow of hot melt, even in difficult to reach areas. It features a smaller opening than the standard nozzle and is easily installed on existing vale assemblies on all 3M hot melt applicators.

     

  • 3M 9725 Scotch-Weld™ Nozzle Tip, 0.072" Mini Extension Tip, For 3M™ Hot Melt Applicators

    ID: 3MA9725
    Mfr ID: 62972599302
    3M hot melt applicator TC nozzle tip 9725 is a mini aluminum tip designed to provide a precise and controlled flow of hot melt. ​Aluminum construction is durable and can withstand high temperature hot melts.

     

  • 3M 9895 Scotch-Weld™ End Cap Seal, For Polyurethane Reactive Adhesive Applicator

    ID: 3MA9895-4
    Mfr ID: 62989500046
    3M 9895 Scotch-Weld™ End Cap Seal.

     

  • 3M 9946 Scotch-Weld™ Extension Tip, 0.072" Orifice, For 3M™ Hot Melt Applicators

    ID: 3MA9946
    Mfr ID: 62994669802
    3M hot melt applicator PG II/PG II LT Extension Tip 9946 is a brass extension tip for 3M hot melt Applicator PG II/PG II LT. We constructed this brass tip to feature a better sight line. The design of this hot melt applicator extension tip allows for maximum control during application and reduces initial surge.

     

  • Bostik K343078 Dispensing Gun, For 7538 Series Epoxy Adhesive 2 oz Syringe

    ID: BOSK343078
    Mfr ID: K343078
    Mfr: Bostik
    Bostik K343078 Dispensing Gun.

     

  • 3M EC Scotch-Weld™ Hot Melt Applicator, 24 oz, 1/Case

    ID: 3MAPOLYGUNEC
    Mfr ID: 62968099309
    3M Scotch-Weld hot melt applicator EC as a versatile applicator that can dispense hot melt adhesives with different melting points. Palm trigger helps improve operator comfort in high demand applications.

     

  • 3M EPX™ Pneumatic Applicator

    Multiple item options available
    Mfr ID: EPXPNGUN
    Our 3M Scotch-Weld EPX pneumatic applicators efficiently apply adhesive from 3M Scotch-Weld structural adhesive Duo-Pak cartridges (sold separately) for easy, quick applications using a pneumatic (compressed air) connection to supply continuous pressure, enabling a fast, easy way to meter, mix and apply two-part adhesives.

     

  • Loctite 1058071 Dual Cartridge Manual Applicator, 75mL

    ID: LOC1058071
    Mfr ID: 1058071
    The 1058071 dual cartridge manual applicator is a hand-held, manually operated applicator designed for 2-part adhesives packaged in 75mL dual cartridges. The dispenser is compatible with 1:1 mix ratio products.

     

  • Loctite 97132 Vari-Drop Applicator without Tubing and Guard, 6.25" L x 0.625" W x 0.625" H, 0.25" Tube

    ID: LOC97132
    Mfr ID: 97132
    The 97132 Vari-Drop applicator is low cost hand, manually controlled held valve suitable for dispensing low to medium viscosity products. The adjusting screw allows repeatable dispense from drops to heavy beads.

     

  • Loctite 98414 Peristaltic Hand Pump, 50mL

    ID: LOC98414
    Mfr ID: 98414
    Loctite 98414 is a manual, peristaltic, 50mL volumetric bottle-top hand pump applicator that mounts easily on any Loctite 50mL bottle. It is especially useful for applications where freedom from product feed-lines is desirable.

     

  • Loctite Dual Cartridge Manual Applicator

    Multiple item options available
    Mfr ID: LOC-983-M
    The dual cartridge manual applicator is a hand-held, manually operated meter-mix dispenser. The dispensers are compatible with 1:1 and 1:2 mix ratio products. These dispensers provide a convenient, cost-effective method to apply product with minimal waste.

    In Stock

    • 1(current)
    • 2
    • 3